Forest#2's latest activity

Because some will not turn on without a certain input voltage. Strange but true. If a external voltage (usually battery voltage)is not...

Are you getting battery voltage to the regulator. Because some will not turn on without a certain input voltage.

I purchased a HF plastic welder and I use the black zip ties for the black abs tank welds and the white zip ties for the white or clear...

Assuming it's plastic, not metal. I've plastic welded several of the PLASTIC gas tanks including the large rear mounted ones. I get best...

Also make sure the operator is not over filling the tank. The venting system will leak if the tank is above the bottom of the filler...

As Rivets indicates in post #17. Post up the engine model, type, code (especially the code) The rings on some had a parts number...

Make sure the engine brake cable (EBC) is releasing the flywheel brake. Or if the cable is not present make sure that the brake is...

Have you consulted Al Gore?

When the horse is dead, it is time to dismount!

and some links to rebuild you tube videos of the Nikki rebuild. Nikki Carb Rebuild Single Cylinder Briggs - YouTube and...

Some carb info for your single cylinder Briggs engines with the Nikki carbs: Briggs first used a Walbro LMT carb on those type engines...

I would try to find a electrical schematic on-line and download/print of the machine and then troubleshoot. (since you indicate you have...

Engine model, type and code?????????????

Read post #2 couple of times.

TEST, don't just replace. If you don't have a test light with incandescent bulb, buy one. It shows more or less current by illuminating...