Recent content by fixit1ddh

Wonder why they didn't put grease zerk on them wheels. My 2015 cub zturn deck antiscalp wheels have grease zerks. Grease every 10 hour's and they have never made a sound.

We tow all the time with our China 107 cc atv. Sometime I use it with the roller that says 600 pounds. I pull our Yerf dog scout when the belt breaks and pull it home from the back 40 1 st gear wide open. When engine starts smoking " not out of exhaust " I shut it down and take a break to let it...

Hopefully something here can help. https://dntpro.com/blog/gy6-engine-code

I drilled & tapped my case spring of 2023 on my 2015 with 2200. It had 630 hour's & oil looked very close to Yours.

More of My Friends & Family passed from the jab. And I do not know anyone or Family member who passed from the covid.

Here is manual. How to replace blades page 15. https://www.manualslib.com/manual/32200/Craftsman-247-77586.html?page=15

This looks like the one. https://www.partstree.com/models/247-775862-24b-485b099-craftsman-chipper-shredder-1998-sears/24b-485b099-general-assembly-0/

I Adjust the valves on my kohler every 200 hour's because of that reason. That's what kohler recommends. My Wife's same model kohler has over 400 hour's and have never had to Adjust. On mine I Adjust the intake to the minimum adjustment. And I'm good for another 200 hours.

On mine I watched a YT video. I put a switch in the wire so I can reactivate it at anytime.

Some people have great luck with them. Others don't. There practically the same as CC. In the 54 inch deck TB deck is stamped where CC is like a manufactured deck. There both made by MTD STANLEY. I have 2 CC 54 and have had zero problems both bought new 2015 and Wife's 2017 we mow between 5 & 7...

You reminded me I need to change the oil in my 2008 14hp. Single cylinder air cooled generator. It still has the original fill of 15w40. These oil debates is the reason I changed the oil on Wife's 2008 snow blower in 2021 that still had original oil fill. And yes they both still run like new &...

I know on some of them cockie engines they now recommend 20w50 engine oil.

Our town had the largest gm cast iron foundry in the US. Now it's shut down has not poured any cast in probably 8 years. It was set to be torn down. I think cast iron will never return to production of equipment we loved of the past.

I hear getting Husqvarna part's are getting hard to get. There shutting down a lot of factories in North America. Quess they want to support electric BS and not there ICE equipment.