Diwali's latest activity

The carburetor bowl should not be too difficult to get off to see if it has any rust or water droplets in it. A carburetor will not suck...

+1 As well as dirt, bugs, grass and all other junk you don't want in your carb. All you guys using open top fuel cans better get a...

Pic of carb bowl

Hi Diwali, Is the pin stuck where the float hinges to open and close the needle. Some of the pins only fit one direction and wedge in...

Thanks for all the replies. All useful. Had another go with the carb. and cannot get the float assembly out of the carb bowl. It’s...

Hi Diwali, Sometimes it's a matter of trying the simple approach first. Yes, most likely the carburetor will need some disassembly to...

Thanks. Removing the carb bowl turned out to be a bigger job than expected…. and, after cleaning, it didn’t fix the problem! I should...

My JD X127 engine, B & S V-Twin 656cc, model 40N8770072B5 runs but is continuously hunting After removing the air filter and spraying...

You might think about: Instead of hosing off a deck for debris removal try using air pressure or a leaf blower. Reduces the amount of...

I use the blower that I also use for ”sweeping“ the driveway and sidewalks. But this could just be another tool for your wishlist… 😉

I have an EGO 56V blower and just purchased their weed eater. Both are beasts! I'm not a huge fan of electric yard tools, but the weed...

If you took the wheel off to fix the puncture it does seem like the key has dropped out of the keyway. Forgetting the key while removing...

Blowing off equipment with a blower is better than hosing it off. If done consistently enough, grass won’t build up all over the...

I agree blowing off with air is preferable to hosing down with water but not everyone has an air compressor. I do have a small one but...