Digiacomo's latest activity

90 in. worked great.........thanks for the reply.....

I need a drive belt for an old toro...... jack"s recommends 5/8 x 901/2...tracter supply has 5/8 x 90........can i go short a half...

sheared input shaft woodruff key....not flywheel key,,,,,

Ok thanks a lot........the old drive belt was stretched out so that it was rubbing on itself at the tension pulley........the new belt...

title explains it.......Is this a common problem??..........I replaced the long drive belt [I could have had some slippage with the old...

thanks for the reply...looking at the parts blownup is a good thing......but it leaves a lot to the imagination...I think I have all the...

I bought an ariends mower 935009..........003026.......38" deck........I guess they were made from 79 to 89??.....this machine is in...

I tore this one down to the circuit board.......no battery.in it.....I got 12 v to two wires but I couldn't get a flicker...

I noticed that the hour meter was not working, so i thought I'de start by checking the plugin........i got a 12v reading on one wire and...

I hope that you checked the oil carefully before you ran it......if that carburetor solenoid was stuck in the down position .......you...