Recent content by Dennis Mohn

I agree, no argument from me. I installed many over the years also, and each were unique to the machine. I will add they were installed at customer request and not by mandate

Before I even remark, yes I own a Stiener/Ventrac. You sound like an activist more than a concerned owner. Responsible or reasonable persons will look to be certain the area they are operating in is safe and clear. If they wish for additional equipment to be installed they will pay for it or...

A lot of good replys here , but you didn't mention if you only use the saw periodically or every day. If you aren't interested in spending a couple hundred dollars for a quality sharpener Harbor Freight sells one for about $30 bucks and even Oregon has one for about $100. You don't need to go...

I would also check for engine to ground and any other ground wires for corrosion , You state having checked the wiring to the ign. module. Did you check for water or contaminate in the fuel system? Do you leave fuel in the tank over winter or did you shut off the fuel and run it dry to remove...

Have you checked back with your sales rep to see about a replacement? Tractor supply and a number of other outlets also have tires and rims you can match up to what you are running on your unit.

It has hydrostatic steering and may have a pressure differential to one side more than the other. Not unusual and the steering wheel may not always appear to be centered because of that.