Recent content by dawgn86

update: set the exhaust at 0.06 and the intake at 0.05. Runs like new now..thanks for the advice!

Good evening, Mower: 2014 Craftsman T3000 / Model 917-203900 with 440 hours. Engine is a 22 HP Briggs platinum / Model 44R677 Type 0021 G1 ( info from the valve cover). so i have been chasing a small misfire/backfire in this mower for a few weeks now. Some suggested adjust the valves. I have...

Good evening, Mower: 2014 Craftsman T3000 / Model 917-203900 with 440 hours. Engine is a 22 HP Briggs platinum / Model 44R677 Type 0021 G1 ( info from the valve cover). so i have been chasing a small misfire/backfire in this mower for a few weeks now. Some suggested adjust the valves. I have...

is there an adjustment bracket mounted on the deck where the cable ( part 152 ) attaches?

The fuel tank is not the easiest to remove; have done mine a few time already.

Good morning, is there anyway to order this part alone instead of buying the whole assembly?

I ordered one of these and works great

Thanks Marks...im a numbnuts....i did figure out I had the belt routed wrong and now have it fixed. I also received my new drive belt yesterday and put it on....what a difference a new belt makes!

Mower: 2014 Craftsman T3000 / Model 917-203900 with 440 hours. Engine is a 22 HP Briggs platinum / Model 44R677 Type 0021 G1 ( info from the valve cover). noticed mower wasnt pulling the best on hills and saw on other post where grass could accumulate in various parts on the RS 800...

Tiger, it does and I will clean it again next chance I can... Thanks

Good afternoon, Mower: 2014 Craftsman T3000 / Model 917-203900 with 440 hours. Engine is a 22 HP Briggs platinum / Model 44R677 Type 0021 G1 ( info from the valve cover). This mower sat for 5-6 years when the in laws gave it to me. I took of the carb and cleaned / fresh gas / new plugs /...

I was recently gifted a 2014 T3000. I spent hours blowing grass clippings off the transmission and all under the tractor. The amount of grass would have filled a small dumpster. I replaced the CVT belt as well. Doing good so far... 442 hours

I recently was gifted a 2014 craftsman T3000 with the RS 800 transmission. Axle seals were leaking bad. Ordered 2 from Amazon and installed. I put some gasket maker on the seals before installing and problem solved.