D0UG's latest activity

So installed the new switch, turned it to crank, and blew the fuse. Good grief. I noticed that if I disconnect the small wires from...

I got super busy with work and other home projects so just been jumping it off straight from the battery for the last 2 weeks. This...

With the ignition switched turned to crank, there is 12V on the green solenoid wire. The white solenoid wire never has voltage or...

When I went to exchange the switches, I realized the brake switch was mounted in the wrong screw hole. This kept the button from...

I will exchange the brake switch and the right neutral switch and see if that makes a difference. I don't have an extra switch.

The brake switch and the 2 neutral switches are the same - - Part Number: AM128925. The brake switch SW4 connects to the connector with...

I already put a jumper wire on the seat switch connector. That is the only way I could manually crank the starter.

The battery is less than a year old, fully charged, and all connections tested. Its not getting 12V to the starter solenoid. I wonder...

I ordered another K2 but it is expected to deliver about 8/13.

Thanks. I suspected the box in the fuse panel was K2. I went back to check everything again and found the 7.5A fuse blown again. I...

Well I moved the brake and left neutral handle switches but now it doesn't have ignition voltage even when I crank it with power...

This is your cranking circuit layout. And this is your ignition interlock system layout.

Thanks a lot for the wiring diagram. It helped me recognize I witched the connectors on the left control handle and the brake. I will...

After 2 days of looking at this and grass is now knee high, I decided to just crank it straight off the battery so I could mow grass...

z335e will not crank. Tested brake, seat, handle safety switches and all fuses. Replaced starter solenoid and ignition switch but will...