Recent content by CubbyCommando

Update: I was able to remove the pulley after soaking the pulley (from the top) with PB Blaster daily for 3 days and then using heat, air hammer and 3 jaw puller. Completely destroyed the pulley but no harm done to the seals or shaft. I sanded the rust off the shaft with emery cloth and...

Ugh. Yeah the pulley is already bent so it needs to come off. I've been drenching it with PB which I'm going to keep hitting it with until the new pulley arrives. A post above recommended heating the pulley and not the hub so I'm going to try that and also hit it with an air hammer/chisel to...

Great tip. Thanks!

Thanks slomo!

Thanks StarTech. I'm probably going to have to go heat and puller route as I'm not feeling unbolting the engine. Additionally, even with my light use of the jaw puller I noticed I did in fact already bend it a bit so I just ordered a new pulley and plan to do it right with anti seize once I...

Hi All, Trying to get this engine pulley off so I can replace the drive belt and that sucker is stuck on there pretty good. Any tips on how to remove? I've been trying with a 3 jaw puller but am afraid I'll bend the pulley. Model CC XT2 131QA1CQ010