Recent content by Cfs

One more thing…sometimes the carb gets so cruddy at the inlet that the float needle sticks and gas cannot enter the bowl. If you remove the drain bolt with the gas shut off open the gas should continue to run through. If only a small quantity of old crappy gas comes out and it stops, your...

I just looked at an IPL for a version of your snowblower. Keeping in mind that the PR241 model is like saying it’s a Ford Mustang when what is needs is a VIN number to get exact parts. There is a much longer number that begins with a 9 that is needed for exact parts matchup. All that said it...

Is this a Honda style carb with two bolts on the bottom of a metal bowl.? If so there is a brass orifice in the center of the carb. It will require a very fine stiff wire, insert the wire up through the orifice and make sure it is open. The wire should be able to insert a full inch to inch...

If there are 2 bolts on the carb bowl. The one at a 45 degree angle is a drain. If there is, remove that bolt and drain some gas out. Catch the gas in a clear container ( old jar?) See what that it looks and smells like. It should be clear and should smell like gasoline not like varnish or...