On This John Deere Ryder The Engage Blade Function Is Not Engaged & The Disengage Function Is Engaged. Am I Missing Something ? Just Doesn't Seem Right.
What Can I Do To Correct It ?
This is a mower that is not that old. The problem is that when running oil starts to come out of the breather tube and out the air filter box. I have installed a new Honda carburetor & changed the oil. I went as far as replacing the spark plug / install new carburetor gaskets / took off cap /...
This Engine Leaks Oil Out Of The Carburetor When Running. Engine Has Good Compression. Engine Is Not Over Full Of Oil - Oil Level On Dip Stick Registers Full Of Oil ( Not Over Full )
Any Suggestion ?
When Running Engine Leaks Oil Out Of The Carburetor. I Pulled The Flywheel & Cleaned A Port Of Where The Oil Drains. Still Leaks Oil. Engine Has Good Compression.
Any Suggestions ?
I Used The Old Method Route As You Suggested & Still Backfiring Thru The Carby When Pulling Rope. Push Rods Seem To Be Okay & I Don't Know What Else To Do.
Any Suggestions ?
Thanks For Your Responce . . . Have A Blessed Evening . . .
HELP : M-305447
T-0568-f1
I installed a new carburetor & adjusted the valve clearance on both intake & exhaust ( turn the flywheel to the end of the compression stroke & gapped both valves to 4-5 THEN turned the flywheel again to top dead center to adjust the other side as...
Would Both Connecting Rods Be The Same Box Number ( Part Number ) For Piston One & Two ?
Would The Piston Be The Same For Cylinder 1 & 2 With The Difference Being On How The Connecting Rod Is Hooked Up ?
The Part Number On The Connecting Rod That Was Sent To Me Is 498314