when used test light and checked the small terminals the starter did turn over. also if i keep turning the key on off try to start the unit it will staft and run briefly also when it does that it seems to be in gear and tries to move
i changed out the Solenoid has the same problem also matched up the old switch they are the same. You talked about a safety switch problem what switch or swithes
had power to one large terminal/ checked the second large terminal with key in start position and clutch/brake pushed in had no power checked the two small terminals with the clutch/brake pushed in had power on both terminals. one note when touched one of the small terminals with the test...
thanks but the battery is new(two weeks) and i ran the unit two times before this happened. When i jump across the solenoid the starter turns over good but it want start
i have put a new key switch and a solenoid the stater want turn over i can jump the solenoid and the stater turns over good. when you turn the key all the stater will do is make a nose and doesn't turn over