bartles's latest activity

A Briggs Model 254707 Code 0120-01 Several years ago I restored an old, 1973-4ish Dixon mower for grins....what a mechanical marvel it...

Maybe if you get off the lazies and actually look up the mower then you would know is it not a CVT system. Don't be so lazy not to do...

Thanks!

The area on the side of the tank you can see the fuel level from the outside of the fender had numerous cracks. I got a plastic welding...

Well my "power of observation" truly failed me on this one!! Hopefully I can attach a photo of a missing bolt from the rear mount...

Thanks! I'll start there...wish I had paid more attention when I replaced the belt...simple stuff gets one every time!!

Working on a Model 934778 60". The mower had a broken drive belt. I replaced the "broken" drive belt and the idler pulley. The...

thxs to all. I got a plastic welding kit so its off to practice I go!! I'll let y'all know how it turns out. Thank you again for all...

This mower has a vent system that runs from both high points on the tank back to the intake. I'm thinking is has to do with CARB.

Been my experience that no tape or glue works on plastic gas tanks. I think most are made of polyethylene which seems to not let...

So true!! Thxs

Plastic weld it. Very simple. Can use a simple soldering iron and zip ties for rod. They make plastic welding kits you can get for...

The clear/white plastic tanks a hot glue gun will stick and seal the leak and gas will not soften it.

Also make sure the operator is not over filling the tank. The venting system will leak if the tank is above the bottom of the filler...