bamadirtrider's latest activity

And I would give Xtreme a quick call to make sure that the end cap is correct Never seen one that was not D shaped so yours might be a...

Either that or remove the engine shroud then using a large flat blade screwdriver insert the tip into the flywheel ring gear and hold up...

Remove the spark plugs. Turn the engine by hand until one of the pistons is coming up toward TDC on compression stroke(valves need to...

Xtreme PTO clutches do come without the Double D adapter/spacer, Just depends on the application. Also even if the Double D spacer was...

Update: We installed the clutch following the guidelines in the install pages AND those that were presented here! He is cutting grass as...

Question: His appears to be a CCW Clutch (Pulley down - Toward the ground and clutch toward engine case. He has the Special-Washer which...

Over the years I have gotten smarter or perhaps lazier not sure Now when I fit a clutch I run a stud up the crankshaft , slide the...

Awesome info. Might have just saved him some extra dough! Appreciate it.

Appreciate that info. Will tell my neighbor to read up some before attempting replacement!

I will double up on what Star said I managed to totally stuff an Extreme clutch by using my rattle gun Expensive lesson learned Had to...

Thanks for the help. Will do.

it is a Model: STCII-61V-32BV S/N: R3100200

Non-electron familiar folks think fuses protect the device. Nope. They protect the wiring to the device.

He put an inline fuse of 7.5A in circuit and blew it immediately: the blades didn't even try to turn. So He'll be ordering a clutch...

Once you get down to under 1 ohm its takes a milliohms meter to measure that and most el cheapo meters simply can't read accurately this...