Auto Doc's's latest activity

New belt with hardened areas from sitting a long time (waiting for machine to be sold) and new paint creating excess friction on the...

Time to insist they get an area rep involved to find out what is going on. I also recommend you call the factory customer support...

Have you considered making a ballast box to sit on the rear or a small utility trailer with some weight?

Even if you clean the inside of the case and sump very well, run it for 15 minutes and change the oil again. On the second change if you...

Sounds like a problem wet grass, cutting with cheap budget low lift blades and a chute restriction. Did you buy this from a box store or...

Hello C., The D adapter is seldom included in the ones I have ordered. The adapters are made to standardized dimensions, so they are...

Hello C., I see the double D style adapter used on most riders with electric PTO clutches and the stacked pulley design use just the...

I have my generator full of fuel and the cover is not easy to access for the numbers. I did look up a B&S 10HP snow blower engine and...

This comes back to what I mentioned earlier about keeping treated gas in the fuel tank for starting and warmup, then shut the gasoline...

I have my generator tank full of fuel and the cover is not easy to access for the numbers. I did look up a B&S 10HP snow blower engine...

Retighten your engine mounting bolts as well. A ground problem is usually the last place that people think to look, but it is half of...

The trouble is that your original engine number information does not call for an electric start option. I will get the engine...

These plastic cams can create a twist break in the middle and still turn, but the lobe(s) will be out of relative time to the stroke of...

Key switch is supposed to send power to the solenoid when in the cranking position. Is it doing that? If so, then the solenoid pull-in...

Test for power to your key switch and if there is power going out when you turn it to the cranking position. It is a matter of tracking...