Auto Doc's's latest activity

Hello Mac29, Mount the tire on the rim with a new valve stem, then put a ratchet strap around the tire in the middle of the tread...

For folks reading this thread, I ask you check out You Tube videos by Lake Speed Jr. He is an oil engineer and know this stuff backwards...

I think the port without anything connected is actually a bowl vent to atmosphere. Most have a simple hanging line coming off of them...

I have seen this exact same coating when a customer had diesel mixed in a fuel can. I ended up using Chemtool B-12 carburetor spray to...

It is a Chinese carburetor. Your best bet is to try Parts Tree using the model plate information off the generator. Here is a parts...

McClane is just the brand of the edger. The engine is a Briggs and Stratton. Is the carburetor bolted tightly to the engine? I think...

Hello Tim, I ILENGINE has already answered your question. If the generator has sat for a long time, the float needle is likely stuck...

If you want a genuine fuel filter on Ebay make sure you use the word "genuine" in your search. Many aftermarket sellers will list the...

The mower decks work pretty good for leveling out mole hills also.

Hello T, We need the product label ID number from each machine. I'm thinking the only compatibility might be the main mounting...

Most "oil burners" and "smokers" are caused by a dirty air filter. An engine is basically an air pump with fuel and proper ignition...

Does it have a manual choke or automatic?

Hi G, You are certainly not doing any disservice by changing your oil on an annual basis due to reduced frequency of use.

It just occurred to me that the center threaded stem is adjusted all the way back by the nylon locking nut. Back that nut off to close...

Smoother engagement also means increases clutch plate wear which leads to more frequent air gap adjustments.