Auto Doc's's latest activity

You notice that threaded rod? That is for making a manual adjustment when the blade wears the ends down. Pull the clip out and turn the...

Hello SamB, I would say "let sleeping dogs lie". Engine flush can easily do more harm than good because it is formulated with release...

I see you are new to this site. Welcome. Be aware that we need the machine product identification label information (PIN). Some people...

Sounds to me like the belt tensioner pulley is getting hot and locking up. That will slowly burn up a belt. Are you using OEM belts...

Hi Robert B., There is a pulse type fuel pump that has the 2 fuel lines (supply and carburetor) and then a 3rd line for the crank case...

I didn't notice the OP date. Oops! Lingering site clutter strikes again.

Can you pick out one in the list...

Hello ILENGINE, He could have been a tractor tech and not worked on smaller equipment. Just the same though, I think he would know...

That is one of the biggest challenges on this site. Having people provide the proper information. Always have you PIN (machine label)...

Hi slomo and StarTech, Thanks for uploading examples. Many of our followers are not aware of these strange testing methods that are...

Hi StarTech, I do not have the variety wiring diagram available to study (online is a crap shoot). I recently dealt with a JD 757 that...

Hi slomo, Can you elaborate how you do this?

Disconnect the PTO and run it around to see if it still happens. A seat switch is also suspect, so check all of that wiring. It only...

For the past 2 days I have had reply delays and page cannot be loaded messages happening. No duplicate replies as before, but there are...

Hello Cfs, While out of the head, can you slip the tip of the valve through the large hole down to where the groove is and then slip it...