Auto Doc's's latest activity

Compression at 30 PSI is way too low to support combustion. These have a compression release and usually show around 60 PSI for a...

https://mowpart.com/bracket-l-roller-75576-758-610hon/?msclkid=79b846c6448f1f63ef3c2e77abc77e3e&utm_source=bing&utm_medium=cpc&utm_campai...

Do not have a charger connected when testing but make sure the battery is good. Only test for voltage drop with the key switch held in...

Are you looking up the mower info y using the product label information? A "mulching kit" is a kit that is added to a normal deck on a...

Sounds like the exhaust is plugged with carbon. Air cannot get in if exhaust cannot get out. Some have a simple spark arrestor screen...

From your description, it needs the valves adjusted so the compression release will work. If it still fights the compression after...

Hi ACF, Here is an example of the voltage drop test...

Where is the line that leads to the carburetor come from? They may have it plumbed so one tank is the primary and the other is the...

Are you familiar with using a meter to do voltage drop testing?

Are you cutting with the mower RPM set to high, or trying to save gas by cutting at low throttle? Mowing should be done at full throttle...

Okay?

Hello ACF, StarTech sent you diagrams, apparently the second one is a match to your machine. Print off and study the diagram. Use it...

Do you have a multi-meter or a single bulb 12V test light. Just randomly changing parts is not diagnostics, it's a lesson in futility.

Sounds more like it needs landscaping and sod put down. The grass is not hard; it is the condition of the ground.

I don't think too many folks are going to rush right out and order Amsoil for their modern throw away 2-stroke just so they can conduct...