Auto Doc's's latest activity

Solved it! Long story shortened, all it needed was the 3 clutch adjustment bolts tightened. How I got there... Reassembled and...

hlw49, Can't access power portal without a username and password. They don't allow cut and paste of their highly sensitive classified...

Hello ACF, What is the PIN on the white sticker on the machine? What are the numbers the engine label or stamped into the top of one of...

Hello shre74, The stamped numbers off the valve cover would help greatly to know which 22 HP B&S you are working on. I think the...

Hello 3stroke RN, Your post is a bit confusing. What are you asking help with? The header says 6.5 Gold Pro Dura Force. Could you at...

The black flat side pulley (shown closest to the side from where of the video was taken) is moving around way too much and appears...

Hello kmills74, Quit shot gunning parts without understanding what you are doing. It just creates confusion and often more problems...

Hello P, I had to edit the link, try it again. There should be an identifying label on the deck of the machine. It may be hidden under...

Thanks Startech, I did not realize what took place when it opened to my C: drive. The OP only has to do a search for ZD 331 manuals...

More than likely, the Ethanol fuel collected humidity which turned to water droplets in time. Seafoam is good for braking up the...

Don't just blindly change them, prove where the problem is so you understand better.

Hi GBREA, The oil sensor will not even let it start if was connected and bad. Seeing how it is not connected or exists on this engine...

Homemade mulch plug. Cool

Hopefully, you re-levelled the head surfaces on a true surface like tempered glass with some fine sandpaper before installing the new...

First, pull the plugs and see if they are wet with water. Your fuel can may have had water in it. To get warranty, call the dealer you...