Auto Doc's's latest activity

Sounds like the hydrostatic transmission is worn out.

I don't think the suspension parts are designed to handle all that weight. It may turn it into a nose heavy bull dozer.

I prefer Kohler if I had a choice. Clean fuel and keeping the oil changed are the life of any small engine.

Invest in an electric impact gun and sockets.

I believe the fuel tank pickup line is going to be the issue. They collect debris over time and it is very subtle for it to gradually...

Can you provide the product label information? Troy-Bilt has a lot of different models other than just the one you have.

Were you able to get it back together then?

Check all the wiring harness on the front bottom corner of the engine. These are having issues with rub through and breaking wires along...

Can you provide a coupe of pictures of you brush end cap parts? I feel like we are trying to instruct by brail here.

I take it that this is a fuel injected model?

Have you resolved this problem yet? Just checking.

You will have to remove the PTO center bolt an slip the PTO off. It may have to come apart to get the belt material out of it.

You Have to make 4- square bottom "U" shaped stiff wire clips to hold the brushes back and allow them to slip past the commutator. There...

Often times, equipment manufacturers will assign their own part numbers to spark plugs, but the plugs are produced by Champion, ND, NGK...

The next possibility is debris floating around in the fuel tank and blocking the fuel pickup tube. That or the fuel shutoff solenoid on...