Auto Doc's's latest activity

This is a dirty air mixture passage in the carburetor problem. Do not tinker with the governor because that will just create new and...

Hello PTmowerMec, In the video, that sounds like a coil breaking down issue. You would need 2 adjustable air gap spark testers between...

Actually, I would call that a typical bracket mounted inline shutoff valve. The question I would ask is if the valve is working and...

Hello hlw49, Heat molded seat assemblies can be a real pain to work with. For extreme cases, I usually rough up the plastic or sand...

Hello PTmowermec, Even though you disconnected the coil kill wires, the anti-backfire still has the ability to shut off the fuel in the...

Look for one of these shoved in the fuel tank line nipple or down inside the fuel line. Most people have no idea this is the fuel filter...

60 PSI is good for and engine with a cam compression relief built in. This favors a lack of fuel supply from the tank.

Welcome to the forum. For any machine you need help with be sure to provide the product label information for the machine along with...

Note to self: Don't use it as a woodchipper. LOL Yes, it can often be the simple things that will drive you crazy.

I think the crossover line going from tank to tank has a shutoff valve made into the line.

Check the seat safety switch wiring carefully, I have seen several that rubbed through.

Try running with the fuel cap a little loose and see if it keeps running. If it does the tank vent valve is stuck or bad.

We need the product information from the machine label along with the engine information. No one likes guessing. What are you trying to...

H Bartles, A JD 737 zero turn I recently had trouble with actually turned out to be a corroded main fuse that was heating up. It never...

Hi Bartles, Yes, 2-4 Ohms is the standard I use for electric PTO clutches. Most PTO clutch problems I see are wiring related or the PTO...