Auto Doc's's latest activity

Here is a similar build to your engine...

Hello Douglas Lee, Tires are made from petroleum product, so grease will not harm the rubber. As with any product, use it sparingly...

Can you provide the manufacturer label information of this yard machine along with the engine information stamped into the top of the...

Brand loyalty has been perverted and exploited by marketing for the past 25 years. The older well-established companies have shifted...

Look for the engine model and serial number stamped into the valve cover or etched into the side of the engine block on the opposite...

Hi gbrewer, That is made to keep excess dust from building up around the top of the shaft. Not all were equipped with them. Mostly OE...

Make a point to keep the valve adjusted every season and keep your oil changed.

Hello, I apologize for not getting back to you sooner. The PTO and deck belts do not affect the wheel drive motors on these. Did you...

If the fuel lines are old and rigid, I recommend you replace them with a quality brand Old line will collapse internally. Also check...

Hello mRyanAB, Sounds like you are having a fuel starvation issue according to your description. Take the fuel line off at the tank...

Pull the bowl and remove the float, make sure the float does not have fuel in it, simply shaking the float, you should feel fuel inside...

Sounds like it maybe an outsourced "Harbor Freight" style clone engine (Generac just put their name on it). A lot of companies are doing...

The one I have actually split the fuel line from age at the tank fitting, so the ai a good idea to replace the lines.

https://www.amazon.com/Generac-LER1135GMNG-Edger-Orange/dp/B0B197R8H8

Hi Scrubcadet10, I have notice that Generac and DR trimmer along with others have been adding a bunch of consumer product lines...