Auto Doc's's latest activity

Yep, hardware store 3-piece small brush set. They come with 1 each: nylon, brass, and stainless-steel bristles. I buy a couple of set...

Hello Mattmotors, Somehow this thread went off down the "rabbit trail". Have you found an engine yet

I'm baffled, why do you want to perform a multiple flush such a small amount of fluid? Seems to me that and empty with a lengthy drain...

I think these are sealed light grease filled gear boxes, not hydrostatic. There is fluid check that I am aware of.

Hello Mjhover, Sounds like a plan. Make sure you have a way to transport it in the future if needed. Pickup and delivery are never...

Usually, you have to remove the mowing deck and then raise the front of the machine to crawl under and study the linkage operations to...

What are the engine numbers. Sometimes, that will give a clue. I'm curious, why is it relevant?

Fuel flow looks good from the line, make sure to check the carb fuel inlet nipple and float seat are for any trash lodge in them. It...

That one is a secondary. the gold yellow colored one below that is the primary. I replied earlier about the throttle shaft rod... it...

Looks bent to me and holding the throttle from moving freely like it should

This is a battery conductance tester and does not load the battery like the old-style toaster grid designs. They are more accurate...

I am only aware of universal cutter head adapter kits that will let you change the thread pitch design.

This is an odd design, likely a private labeled electrolux design sold by Husqvarna back then. Husqvarna bought out several struggling...

I forgot to ask earlier, but can you provide a picture of the engine label information off of the upper fan shroud (if Kohler) (if B&S...

Can you add pics of the top. right and left sides of your carburetor with the top engine shroud removed. A distance of roughly 2 feet...