Auto Doc's's latest activity

What are the engine numbers. Sometimes, that will give a clue. I'm curious, why is it relevant?

Fuel flow looks good from the line, make sure to check the carb fuel inlet nipple and float seat are for any trash lodge in them. It...

That one is a secondary. the gold yellow colored one below that is the primary. I replied earlier about the throttle shaft rod... it...

Looks bent to me and holding the throttle from moving freely like it should

This is a battery conductance tester and does not load the battery like the old-style toaster grid designs. They are more accurate...

I am only aware of universal cutter head adapter kits that will let you change the thread pitch design.

This is an odd design, likely a private labeled electrolux design sold by Husqvarna back then. Husqvarna bought out several struggling...

I forgot to ask earlier, but can you provide a picture of the engine label information off of the upper fan shroud (if Kohler) (if B&S...

Can you add pics of the top. right and left sides of your carburetor with the top engine shroud removed. A distance of roughly 2 feet...

How many blades of grass are in a square foot of your yard?

Ditch the cork design and make your own out of pressed paper gasket material. It will last much longer.

Hi ScrubCadet10, I think the small engine overhead valve design was a delayed bleed over from the automotive industry, it just took...

Hello Its Me, If a rod journal has been worn down from lack of oil and frequent overheating, the rod bolts will loosen due to the...

Hi 1Chris 1, Check for free-flowing fuel from the fuel tank to the carburetor. Remove the line at the carburetor. Use a good size...

That is blocked carburetor air bleed passages. Air has to balance in the carburetor as fuel is being drawn in. If it does not, surging...