Auto Doc's's latest activity

Disconnect and reconnect batteries just in case there is some microscopic corrosion due to temperature changes over the winter. this is...

Hi newbee, Try to list the product tag identification numbers when you make a help request, because similar machines may be equipped or...

Look at items in group 47, there is a 3rd long narrow/thin spring at the throttle rod. That one is easy to miss. It is usually used to...

Hello rhkraft, You missed the part about it being the Generac 15KW "portable". They do not have a constant trickle charger like the...

It would help to have the number off the machine tag. Don't assume e know exactly what you have. Machine and engine numbers are...

The shim washer was left out by an idiot (just a guess). It is what sets the correct side clearance for the assembly to work. It...

A needle is needed on the float inside the carburetor. That or the float is heavy with fuel inside of it. After that the oil will need...

Gee... Look at the parts diagrams and figure out what is missing from yours. There are three springs in the various assemblies shown. I...

Gee... Look at the parts diagrams and figure out what is missing from yours. There are three springs in the various assemblies shown. I...

Maybe this will help you...

Very well, I hope it work out well for you.

This is public forum folks, try to use some sense of civility and respect.

Try a 4X8 sheet of plywood in a SWB Ford truck, then place a heavy toolbox on top of it thinking it will hold the plywood stable. Pull...

Hi Startech, Probably, I should have added do not connect while the jumper vehicle (compact tractor or vehicle) is running. I have...

Don't ever rig a blade adapter onto an engine shaft. That will get someone seriously hurt or killed. A flying mower blade is no joke...