Recent content by ACF

broken push rod

fixed. feel like a real dumba** assumed that owner who said he was a good diesel mechanic had a clue, but ended up being wrong when he replaced the drive belt he installed it correctly but placed the pulley on the wrong side of the belt. after going crazy, talking to you guys and hydro-gear...

have a briggs model 286H77-0121-E1 serial number 020624ZA. engine will not stay running. first solenoid was bad, replaced carb with aftermarket carb. mower will for few seconds. did compression check only 45 psi, getting spark. replaced spark plug. so not sure if due to low compression this is...

thanks

have a cub cadet model 13wf93at010 that had a electrical short looks like the ground wire is burnt all the way to the key switch. owner told me that he connection another ground wire to battery, but i think that he attached to positive side of battery. looking for part number for wiring harness...

found the pulley on transmission the splines were worn out thanks for help

have briggs 44n877-0005-g1 came in running at max rpm, found that governor was broken, after pulling engine and opening engine found that there was cracks on both cylinders going into cylinder. have attached photos not best, was wanting to know if i should continue with replacing governor...