7394's latest activity

I rolled my Toro 30" rear engine rider one time on the hill alongside my driveway. No injuries or damage. I replaced that with a...

Easy. I regularly cut ditch banks twice that angle. As long as it is dry, of course. Cut either way, but would look better if cut...

Guys that mow commercially for a living use zero turn mowers all the time on hills and slopes successfully. Look around and see the nice...

Which is okay until the mower picks one up and puts it through the windshield of the neighbor's car.

Welcome Aboard, Some help should arrive soon,..

Mine (HG 2800)have internal expansion tanks, w / external oil filters,.. They do require service. I just did mine @ 50 hours. Quiet &...

Be curious to hear the outcome of this. That swale is not that deep.

I do mine in the fall :)

Bait out the yard. Fire up the .25 cal air rifle. Fill up the freezer with fresh venison.

Yelp! I don't know how you guys up north take all the cold weather and snow. Down south it's mild compared to Ohio, but still I'm...

I'd be shocked if it was permitted to fill the swale with gravel. That would look bad. Once grass starts growing, it will be fine. Just...

A cut off wheel to cut standard screw driver slots can work .

Which is probably the reason the heads got messes up to begin with.

NPT threads tend to be rough and require thread interference to seal when the threads are basically smashed together. Could try either...

Remember those parts being the end cap and the drain tube look to be steel. Engine block is aluminum. Don't try to mega torque the tube...