robert@honda

robert@honda

Lawn Addict
Joined
Last seen
Threads
97
Messages
1,791
Reaction score
20

Profile posts Latest activity Postings About

  • J
    Hi Robert, I replaced the pan gasket on my HRM 215 sxa mower and now the governor doesn't work.I can manually adjust the rpm by moving the governor actuator, but the actuator doesn't seem to do anything by itself. I saw your response of July 20, 2012 for similar problem, and would appreciate if you could show how to recalibrate the governor, if that might be the problem. Was there a procedure I missed? Thanks!!
    N
    A separate question has to do with the PARKING BRAKE. The beeper stays on while I'm mowing. I figure it's a cable adjustment. I'm on pp 14-5 in the Manual. Maybe it's the PARKING BRAKE SWITCH. After all, this puppy was bought new back in '91 and I have my fair share of aches and pains at my age. How should I approach this issue?
    N
    neilljones
    Issue resolved
    N
    neilljones
    Determined the answer to this problem from the Honda Shop Manual. The problem was NOT the PARKING BRAKE. The beeper sound may be caused by low engine oil, according to the Honda Shop Manual. We'll see.
    N
    Hello Robert!
    I have a Honda HT-R3009 and the Honda Shop Manual. I'm on pp 11-3, CUTTER DECK. The exploded view shows the TENSION ROLLER above the TENSIONER ARM. My vbelt is wedged under the TENSION ROLLER and I can't quite figure out how to raise or get the ROLLER off the mounting post. How do I raise the ROLLER so I can remove the vbelt?
    N
    neilljones
    Well, I finally figured this out. I bought an pulley/bearing remover/extractor from Amazon. Used the 6" legs to pull the pulley up. Removed the vbelt.
    N
    neilljones
    On a separate note, determined why the new vbelt wouldn't work. Turns out, I have the HT-R3009K1 model, not the HT-R3009. The exploded view in the Honda Shop Manual shows everything I had on mine. Turns out the HT-R3009K1 model has a LONGER vbelt, 71". The new vbelt is on order, but hasn't arrived yet.
    J
    Hello Robert.
    I just purchase a pre-owned HRX2172VKA. Are you able to direct me to a website to decode the serial number or can you provide me details on the serial number/mower please?
    SN - MAGA 1681571

    Thank you Robert.
    Jody
    M
    www.lawnmowerforum.com

    Dating Honda HR214 Mower

    Hi! I just bought a used HR214 mower and am curious what the actual manufacture date is. I know they were made between '84 and '89? Anyways, the code on the back is HR214FF - 6026932 and the engine serial number is GXV120 - 1409778. Thank you!!
    www.lawnmowerforum.com www.lawnmowerforum.com

    Robert, A gentleman posted this on the Forum recently, I thought you may be able to help him out, Thanks, Mark
    D
    Hi Robert

    I posted about a engine swap I’m working on for my hr215 sma. Did you have any additional information about the questions I asked ? Thanks Danny
    Myamada1230
    Hi Robert, I just purchased a NOS GXV160 to repower my snapper with. If I give you the model/serial number, would you be able to tell me it’s approxmate age and where it was sold? I only gave the guy $50.00 for it, still brand new.

    Here’s the details: GJABH-12G2157 A1AS
    Q
    Hey Robert, can you send me a copy of the Lawn Mower # 94 April 2010 Service Bulletin ? I am having s similar issue where I only have one speed from my Smart DRIVE - slow. I adjusted the nut but nothing changed. Thank you !! My email is bryan.queen15@gmail.com
  • Loading…
  • Loading…
  • Loading…

Footer Links 1

Top