JoeKarpowski
Member
- Joined
- Apr 26, 2020
- Threads
- 4
- Messages
- 11
Good morning, all....
I have an older model Encore Pro-Series 32" walk-behind, model #32B100, serial #30682. A guy down the street has fallen on hard times and is cutting yards to make $$$ while he waits to hear from a prospective employer, but he only has a 22" push mower so I'm going to give him the Encore once it's ready. I am having trouble finding the correct blade belt. The Encore part # I found is 323003. However, that belt is 5/8" x 81". The belt that came off the mower is only 1/2" and about half as thick as the 323003. I have adjusted the tensioner as far in as I can, but the thicker belt will not allow the pulley to move far enough to engage the blades, I can only move the handle forward about 1/2 the distance needed to get the blades to engage. I cannot find a part # for the thinner, 1/2" belt. Other than that, the mower is ready to go. Any ideas, besides putting the old belt back on? TIA
I have an older model Encore Pro-Series 32" walk-behind, model #32B100, serial #30682. A guy down the street has fallen on hard times and is cutting yards to make $$$ while he waits to hear from a prospective employer, but he only has a 22" push mower so I'm going to give him the Encore once it's ready. I am having trouble finding the correct blade belt. The Encore part # I found is 323003. However, that belt is 5/8" x 81". The belt that came off the mower is only 1/2" and about half as thick as the 323003. I have adjusted the tensioner as far in as I can, but the thicker belt will not allow the pulley to move far enough to engage the blades, I can only move the handle forward about 1/2 the distance needed to get the blades to engage. I cannot find a part # for the thinner, 1/2" belt. Other than that, the mower is ready to go. Any ideas, besides putting the old belt back on? TIA