Latest activity

Well, when you think about it, it actually makes sense, similar to what ILENGINE said. When air is cold, it is more dense, thus the...

Star Tech did a compression test and got 105psi so compression is good. I will get some decarbonizing flid and try that, It runs real...

I use NO-Ox myself on some items. Use lots of dielectric grease around the shop, just not on electrical connections

That why I use an electrical grease that is suppose prevent oxidation in the household electrical panels. It is conductive.

That why I use an electrical grease that is suppose prevent oxidation in the household electrical panels. It is conductive.

Hello U, Do you have a multimeter and understand how to do a voltage drop test on cables and wires? Try using your jumper cable and go...

That number does not come up on a search. What model is this machine? How old is it?

can my power steering column 17162575m be rebuilt .

I typically use acetone and ATF in a small pressure canister when I'm at the shop. If mobile, I use PB Blaster and WD-40

Are you in the U.S.A.? If so, look up Tractor House.com. Is this a 155 articulated model with a front deck you are looking for?

I just love when people recommend coating electrical connections with non conductive grease.

I normally use PB Blaster for penetrating oil and works great. Kroil is supposed to be better, no real personal experience. One other...

Either you have a bad wire connector, most commonly at the battery, but could be were the ground wire connects to the frame, or the...

I just love when people recommend coating electrical connections with non conductive grease.

separate the battery and starter connections, clean, coat with dielectric grease and reconnect. Neighbors machine did exactly the same...