Latest activity

Hello S.A.E. That position is exactly where I moved my cable pins to. However, I could only lift the deck about halfway with the...

Hello S.A.E. That position is exactly where I moved my cable pins to. However, I could only lift the deck about halfway with the...

I finally revisited the mower for a pic to show where I relocated the height adjustment cable's pin and marked the spot with some white...

Both my riders have Kohler engines. I don't go for the 300 hour oil. I prefer to change it every year, and 300 hrs would take me 5-6 yrs...

when i take them out, they get replaced with an iron fittng and plug!

That is actually normal especially with the newer EPA mowers because they run too lean when they are cold.. I have seen several newer...

I have a Cub Cadet steering wheel ZTR, and an older Husqvarna traditional lap-bar ZTR. The CC is easier to control on slopes. The...

A different time indeed although it was relatively recent. I've found quality control and customer satisfaction deficiencies to be...

Those are some very poor reviews. They seem to have gone downhill fast in recent years with their quality control and customer...

I have i have a 747 cc Kohler on my Bad Boy ZT 54 in Elite. The 747 is 22 to 25 hp. Have used full synthetic 10w30 since my first oil...

No matter what the manufacturer recommends, shorter oil change intervals, are better than long. This is especially true for the first...

You know, never thought of that. Makes a lot of sense.

Hello B, First of all, don't engage the PTO at 1/4 throttle. That will cause a "load stall" on many different riders. The engine...

Checking the engine charging voltage also check clutch air gaps. 3. With feeler gauge check gap at all three locations (minimum of...

Hello B, When you post be sure to add the Product label information along with engine product label. I for one hate to take wild...