Latest activity

In today’s market you get what you pay for. Recommending anything less that $3500 is a crap shoot, as unless you have a flat and smooth...

Yes. I will do that later. Thanks.

In today’s market you get what you pay for. Recommending anything less that $3500 is a crap shoot, as unless you have a flat and smooth...

Can’t open photos unless you have google photos, which I don’t. Can you post them a different way?

Knowing how to properly use a good analog meter is better than using a cheap digital meter. Cheap analog meters aren’t worth their...

ZT2200 Fan/pump is spinning CW (from top view); V-belt goes into the pulley correctly, controls correctly connected. Controls are...

John Deere D100 new to me. Brakes could not be further adjusted with center nut. I replaced very worn pucks. Still no breaks. The arm...

Hi tooler: Some of the older parts guys remember the yellow versus black deck debates, but it was mainly so they could identify the...

Thanks for correcting me but I'm looking for recommendations. Out of the three, is there any one brand that is better than the rest?

I finally revisited the mower for a pic to show where I relocated the height adjustment cable's pin and marked the spot with some white...

Hi slomo, In my area of South Texas, we simply have non-Ethanol for small engine equipment and old carburetor vehicles, or we have the...

Thanks Rivits: I have checked the things you mentioned. I have replaced the battery. How many volts should a solenoid require to...

Thanks txmowman: I have not checked voltage drop, but I have a clue. The John Deere parking brake ON makes the problem worse, PUSH the...

Basically you will find that all the brands are basically made by 3 companies. SBD(Legacy MTD) Husqvarna, and Toro. And Briggs...

Remember all circuits under test need to be fully current loaded. Not an accurate test if you have no current flowing.