ron

[RGgretz]

YTA 22v46 dies when engagng blades. All switches good. Completely rebuilt deck with all new belts. What could be wrong?

 

[StarTech]

A couple possibles. Either the seat connector isn't fully plugged in or your engine is only running on one cylinder.

 

[Scrubcadet10]

start the engine, don't engage the blades, and pull one spark plug wire off at a time. If you pull the left one off and it totally dies,right side probably isn't firing if nothing changes then pull the right one off, and and if it dies, left side isn't firing.