Export thread

Mulching

#1

B

bill82

Want to add mulching plug and use regular blades on a T110. Any problems?


#2

R

Rivets

Just closing off the discharge chute wiil not give you a good mulching condition. My experience tells me Craftsman don’t mulch very good in the first place and you will need a mulching kit with mulching blades to get fair results.


#3

B

bill82

Thanks.
Another queston.
I want to add a mechanical hour meter so need to know which wire out of the ignition swicth becomes live with the key on.
I can't find the wiring diagram on line.
None was included in the info packet that came with the machine.


#4

thesilentone

thesilentone


Operational tip, when cutting/mulching, reduce the engine revs and the deck will clear better.

You can buy a Tremble Hour Meter that will not require any power.


#5

StarTech

StarTech

bill82 said:
Thanks.
Another queston.
I want to add a mechanical hour meter so need to know which wire out of the ignition switch becomes live with the key on.
I can't find the wiring diagram on line.
None was included in the info packet that came with the machine.
Click to expand...
On the back ignition switch you attach the meter's 12v lead to terminal A1. Note keyswtich symbols are not on the switch as the diagram but it is the same switch internally.
1713184966517.png
1713185069973.png


#6

B

bill82

StarTech said:
On the back ignition switch you attach the meter's 12v lead to terminal A1. Note keyswtich symbols are not on the switch as the diagram but it is the same switch internally.
View attachment 68347
View attachment 68348
Click to expand...
Thank you!


Footer Links 1

Top