My mower will not go in forward or reverse and I noticed the bypass rod assembly is sloppy or possibly broken. Does anyone know if this can be replaced and how to do it or have any troubleshooting ideas. It is a 24 HP, 42 inch cut hydrostatic lawn tractor by Husqvarna. Any help is appreciated.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
CHANGE BYPASS ROD ASSEMBLY
- Thread starter pastaking
- Start date
More options
Export threadbertsmobile1
Lawn Royalty
- Joined
- Nov 29, 2014
- Threads
- 65
- Messages
- 24,995
HElps if you start with the model & serial numbers off the tag under the seat.
If the mower can be pushed but goes nowhere when you put your foot on the F/R pedal the usual culprit will be transmission belt off the pulley at the back, broken , fallen off or the clutch/brake pulleys failed or fallen off.
The bypass rod just opens & closes a valve so is always very sloppy because most have a dozen bends and follow a torturous path from the tranny to the outside world
If the mower can be pushed but goes nowhere when you put your foot on the F/R pedal the usual culprit will be transmission belt off the pulley at the back, broken , fallen off or the clutch/brake pulleys failed or fallen off.
The bypass rod just opens & closes a valve so is always very sloppy because most have a dozen bends and follow a torturous path from the tranny to the outside world
HElps if you start with the model & serial numbers off the tag under the seat.
If the mower can be pushed but goes nowhere when you put your foot on the F/R pedal the usual culprit will be transmission belt off the pulley at the back, broken , fallen off or the clutch/brake pulleys failed or fallen off.
The bypass rod just opens & closes a valve so is always very sloppy because most have a dozen bends and follow a torturous path from the tranny to the outside world
Model 917.28926 -1 Serial # S070909D002058. It is a Sear's tractor but made by Husqvarna. As I stated in original post the rod is detached. I haven't gone deeper than seeing the end of the rod on tranny end. Thanks..