725D issue with wheel
- Thread starter creeker
- Start date
- Joined
- Sep 24, 2017
- Threads
- 250
- Messages
- 6,441
Looks like the bushings in that wheel are toast.
need new bushings, or a new wheel if it wore into the rim it's self
need new bushings, or a new wheel if it wore into the rim it's self
7394
Lawn Addict
- Joined
- Sep 5, 2014
- Threads
- 84
- Messages
- 4,710
Yes it sure does. Is the other side different ?
I haven't had a chance to really take a look at it, besides thoroughly cleaning it. I'm probably soon going to take that wheel off and check whether the yoke it bent.
I've to admit that a week before I noticed this I accidentally got pretty stuck in mud on the side of a dry creek and tried to get out by driving into the creek and got very stuck in gravel.
I had to pull the mower out with a chain that I attached on the back on the mower, so I could have bent somethings while doing that.
Does anyone know what's the best place to order parts for a grasshopper mower? So far the best I could think of is calling the dealer once I know whether I need a new bushing, a new wheel and/or a yoke.
I've to admit that a week before I noticed this I accidentally got pretty stuck in mud on the side of a dry creek and tried to get out by driving into the creek and got very stuck in gravel.
I had to pull the mower out with a chain that I attached on the back on the mower, so I could have bent somethings while doing that.
Does anyone know what's the best place to order parts for a grasshopper mower? So far the best I could think of is calling the dealer once I know whether I need a new bushing, a new wheel and/or a yoke.
- Joined
- Sep 24, 2017
- Threads
- 250
- Messages
- 6,441
Grasshopper Parts at Jack's
Find all the Grasshopper Parts and Accessories you need, with fast shipping and low prices!
www.jackssmallengines.com
It's definitely the bearing that went bad. I just took the wheel off and am about to order two new bearings.
The yoke isn't bent, and exactly the same as the other side.
One thing I don't understand is why 2 metal rings (only 1 is in the picture) fell out when I took the wheel apart. I made a picture of it. Even in the 725D manual, I don't see any in the parts list.
The yoke isn't bent, and exactly the same as the other side.
One thing I don't understand is why 2 metal rings (only 1 is in the picture) fell out when I took the wheel apart. I made a picture of it. Even in the 725D manual, I don't see any in the parts list.