Search results

Hello to all. My nephew was given a free go-cart. and old uncle here is given the chore of getting it running, So the Briggs and Stratton will not start. I looked into it and found that it had no spark. I disconnected the black kill switch wire and now have spark. I would like to order a new...

Hi Ilengine So sorry for the late response( elderly father). Is this the number? Hope you can read it / If not I will try cleaning off with paint remover k :) thank u for your help on this

turns out it is the carb. the seat and needle. I think I will get a new carb\ does someone here know the part number for this carb? Thank you

the only problem now is when the mower is turned off, it will not restart without a squirt of starter fluid. ps. these are the pics of the carburetor before cleaning.

she is up and running like a champ now. there are some issues tho. 1. there is no primer bulb at all. 2. how to put the oil back in the trans? If I screw the bottom plastic housing back in .there is no fill hole on top. ps. the carburetor was stuck with varnish

Hi prim how would you go about taking off the bushing? do you have any pics?

Hi all I honed out the plastic wheel and now it spins freely. I also check the little transmission to see if anything was hung-up in there. What kind of transmission fluid does it take? I pulled out the spark plug and it was brand new. I spray a little starter fluid in the cylinder and fired...

Hi ILENGINE This is what I got so far, I got the wheel off. The wheel looks good. The shaft that the wheel goes on does not spin in any direction and has grooves in it. The groves lock it in place. My question is, does the spindle spin/supposed to spin? Or does the wheel spin with the metal...

I pick this up for $20.00 bucks the front left wheel is locked up, also I can't get it off. also, the gas tank needs to be replaced. is there a used one out there somewhere? thank to all chim in

hi- hey ilengine while i have your ear- what is this hole in the rear axle for? it looks like it has threads

Hello, took me a while to back The dang them is just to tight to get around the last pully/ Any tips? I am getting very frustrated and the lawn is getting tall

The belt that drives the transmission broke well shredded. My questions are. 1. What is the best way to take off the remanence of the belt? the tractor is really heavy. 2. What size belt or belt number should I get to replace it? where to order it from online. Thank you

So all is working on the lawn mower But--- There is always a but lol. the whole problem that started with this mower. This darn green ground wire- I just want to replace the part. So the question is what is the name of this part? what is the part number if anyone has it. and how in the word do...

Good evening all :laughing: Good news - some of the parts came in. it looks like it was the car seat and pin- fired right up

some more pictures - hopefully it helps out.

So does the linkage right to all? I have noticed the throttle cable does not go to the carborator . Am I missing a cable? . these are the pics of where all the cables are going

Hi folks, Sorry for a long time it takes me to reply but the mower keeps falling to the backburner. Long story short I got it running. But running very weak. The issue is all carburation. I get it running and I constantly have to keep adjusting the throttle lever so it will not die an doesnt...

hi boobala I have found the numbers thank you

this is the mower numbers

and would it prevent spark going to spark plug? it is a bracket that does nothing. there are no moving parts to it.

thank you for your help. These are all the numbers I can fine

Now for the other side. The big handlebar seems to be connected to nothing.... help. Also, the carborator has no linkage. I think it is missing some pices?

Good evening to all The saga continues. went and took off the cables. To my surprise, it was not the cables but the throttle box. took it off the handlebar easy(one bolt) enough, But jimmine Xmas the throttle box itself was a pain to open up. it sounded like i broke it but i didnt. Long story...

Hi BlazNT and all that are following and helping. The cable that connects to the half-bar has so much slack that I don't think its working. The slack is at the very top of bar bracket. see pictures. Upon a closer look, there are 2 cables coming out of the throttle control, which is also jammed...

It did have freash oil in it. and a brand new spark plug. I sprayed some carb cleaner down the air horn. 1st problem: every time i pull on the string the lawn mower pulls forward. 2nd problem: in one of the pictures the handle bar has 2 push down leavers, what do those do exactly??? 3rd...

well ..Same story as usual The neighbor is done with it ,wont start Where to start with this guy? neigbor says it did run . Thank you

it won't start. I replace the coil and I still don't think I am getting a spark. I will take a pic of strange green ground wire with plastic covering around a hook. I replaced with one I made and just grounded it to the linkage of the carborator. hope someone has experience with this,i am kind...

well getting close to the finish line the breaks are stuck on but the deck has been rebuilt and works fine. so after some digging around. its the shifter not pushing back the dis-engagement rod on the deck. So i took off the gas tank and took a look inside. My question is where does that crazy...

The mower runs The mower runs so sweet now. the transmission works well also. I had to put the old belt on for the trans to work. Now the bad.The blads do not spin at all. I rebuilt the deck. one issue is the break pad in the first picture is always stuck on. 2nd is again the belt,Its just too...

I bought this mower back to life from the junk pile . its running sweet now after a new head gasket valve and lap job. the major part of the problem was these are not the right size belts for the Poulan. when running the blades still spin on the no matter what the engament leaver is on.the...

Hello all. I have brought a Poulan mower. that needed a lot of work. I am almost done with it. I have some small loose ends. There are 2 holes on the transmission .the one with the hex does not belong there. Falls off. Does anyone know what size bolt goes there ? And where to get it? I hope...

hello all . i am new . i brought a snapper ridding mower . model number wm280921b . 11482175 . part number 84660..like the one on forrest gump movie . it has a briggis n stratton 9 hp motor,, . that has seized . i need help an advice on how to go about to fix it . i am handy with mower motors...