Search results

On your flywheel nut, it helps a hundred times over if you have an impact gun. I never needed a super heavy duty one so years back I bought an electric one from harbor freight. Not expensive and I’ve used it many many times

I meant 8 and 10. Sorry.

Two googles and I found both 6 and 8”. Plenty on them.

I am not sure how many carbs I care of that stuff will do, but at that price, you can buy a couple of aftermarket new carburetors

Hap a guy drop off a mower, said he couldn’t even pull the starter rope. Suspecting hydro lock, I checked the oil dipstick. Normal. Flipped the mower over and found it was so full of dried grass, the blade wouldn’t mover a bit. Duh!!

I just took a mower in for repair that the owner had just put in a new battery. Exact problem. Easy fix.

The screws you are using are self tapping screws. And hardware store will have them. They actually cut threads when you are putting it in the hole the first. In your next try, just after getting it started, drop a few drops of motor oil or any type of oil to lub. As you are cutting those...

I do watch Donyboy pretty often. As for Taryl, I can’t hack him. Tks.

Yes I’ve done all you mentioned. I guess it the coil is shot so have a new one ordered.

oh my. Your electronic knowledge is way way way above my pay grade. Ha. I’ll trust you guys and pick up a new coil. Tks.

See I found this on testing coils and this guy was actually testing an engine identical to what I have. Are you saying that what he is doing in this test doesn’t prove anything with the coils he is testing? I did my test identical to what he was doing. Tks

I have a lawnmower with a 4 1/2 hp Briggs engine. Absolutely no spark as I attempt to start it. So I pull off the coil and check it for resistance and it comes out OK. 2.77 on a 20,000 ohms scale. I did this with the kill wire totally disconnected. I air gas it when I put it back on with a...

I have a deere 325 which would have been made between 1995 and 2001. The deck on it is a 48C but is getting a bit rusty. I am looking for a deck for sale and here is the info the seller has listed as far as its fitment. ''Fits x400 series,x575,x585,lx255,lx277,lx279, and GT225. 1999 to 2005.''...

Engine is a Kawasaki 18 hp v twin with a heck of a leak. Here is the original thread explaining it http://www.lawnmowerforum.com/showthread.php/39911-FH531V-18-hp-v-twin-leaking-tons-of-oil So what I found, the crankshaft exits the bottom of the engine to hold the main drive pulley and the...

Have a JD with 18 hp v twin FH531V that is leaking oil badly. It appears to be coming out of the lower crankshaft seal. But not when its running but after it has been running 15-20 minutes. Took off the pto, checked and replaced the seal but still doing this. I'm beginning if this might be...

Church has a 325 with a 48c deck and a 18hp Kawasaki v twin engine. So I'm mowing today and here sort of a sound noise, blades stop and discover that the deck drive belt is all chewed up. So stick a spare on and get back to mowing. Very shortly the oil pressure light flickers on and off so I...

So the wife calls me from our summer park model and doesn't sound too happy. There I have a Personal Pace Recycler with elect start. Model 20067. Mowers in great shape but from the way she describes, the engine took a dump tonight. So I'm trying to figure out what to do but sort of leaning...

A friend called with a LT1050 and said he noticed oil on his mower deck, oil level was low and when he started engine and engaged the deck, smoke came from between the engine area and deck. He shut it down right away. He called me to take a look at it so I'm heading down soon. So, I'm guessing...

I have a Lawn Boy model 10357 which is rear drive and has electric start. Well the deck is shot, yep rusted and no longer patchable. Engine, drive assy, and all is in great shape except the dang deck. I really would like to rebuild this mower with a new or good used deck but as far as a new...

A friend is dropping off craftsman walk behind that has a broken drive belt. Would like to get it fixed right away so hoping to get a belt locally. Anyone have any success at NAPA or any other local walkin store. Thanks.

Thinking of getting a ultrasonic cleaner to cleaning out carbs. Wondering if you guys have found a decent buy on a cleaner? And what kind of cleaner fluid do ya use in these. And how long to you usually leave a carb in these to get a good cleaning. Thanks

I have a toro 20067 with a Briggs 6.75 hp engine with electric start. Its been harder to start this summer. Seems to take extra priming. I ordered a carb kits which came today. And as it was, I couldn't even get it started today, with starter or pull start. So pulled off the carb and rebuilt it...