Search results

This is what I bought from Amazon: Neptune NT-1213 12 Volt 1.3 Amp Sealed Lead Acid Hi-Capacity Rechargeable Battery I just noticed is not in stock now. It was $14.95 at the time of purchase. Mowed today and it started every time I turned the key (about 4-5 times stopping and starting). Don't...

Replace the battery with a new one from Amazon. Same battery mentioned in other post regarding hr217 battery. It arrived with 12.7 volts. I installed it and charging rate at mower terminals was 14.3 while mower is running. For $15 it is working well but have only used it twice.

It works in my hrr216 vla.

I have used a fully charged battery (14.4 volts), installed it in the mower, started the mower using only the electric start, touching the Multimeter probes to the positive and negative terminals of the installed battery to the only spot I could find which is when the terminals on the mower...

I will try all of the above and let you know. I have two batteries-the original which is 9 years old and an ExpertPower EXP1213 which has very little difference in specs from the original (12V 1.3AH/20HR). I have both charged and removed from the mower to measure daily the voltage drop from...

I agree that it is for a 6-cell battery. However, I have used with success the PeleusTech 12V 14.4V 1A Float charger for AGM, GEL, SLA and FLA batteries (Amazon). Currently have another battery charging with it currently. I have used it for the past two years and get a charge of 13.4 volts when...

In looking at the battery, model GEP Power Products GP-2795-09 25CCA indicates it contains lead. Are you sure it is Lithium? It appears to be a Sealed Lead Acid (SLA) battery, 1.3 Amp 12 Volt Absorbent Glass Mat (AGM) with T1 terminals. It indicates it contains Sulfuric Acid.

It as float charger (battery maintainer)-not an automotive charger. Specifically, it is a Battery Tender Junior.

I don't believe the mower is charging the battery. When installing a newly-charged battery with an external charger, I get 13.4 volts. The starter will crank the engine quickly. A week or so later, the battery will show about 12.3 volts, which should be enough to start the mower. However, the...

Battery fully charged with external charger and no sign of corrosion anywhere. Original coil-mower pull starts first pull.

It is good but I replaced it with another to test the voltage, still only 6.3 volt output. Last year when checking the battery, there was 12.4 volts output at the battery terminals with the engine running-now about half that amount being produced.

Is there a way to test the stator to see if it is putting out 12+ volts?

Serial number is MZCG-8825154

My multimeter indicates while the mower is running, I am only getting 6.2 volts to the battery-not enough to charge the battery. I last fall replaced the starter assembly since it was failing to start the mower. Starter now works fine and if I remotely charge the battery, the battery fully...

This mower was purchased on 4/15/2013 and has number MZCG-8825154 on mower. The electric start is not working. Here are the steps I have tried; 1. Purchased a new battery and “float” battery charger this spring. When charged the batter has13.4 volts and I have tried it a friends Honda...

My trusty old Honda mower broke the discharge guard spring while moving from mulch to side discharge. I have a new spring but I cannot figure out a way to reinstall it. I have attempted many approaches but I either don't have tension on the spring and the discharge cover is loose OR the tension...