Search results

After playing with my second Tecumseh 10 Hp. engine I can see why they went out of business! Their carburetor and governor linkage suck. The first was a VM100 and the second is a TVM 220. Both have the same governor setup and the carburetors are almost the same but the TVM 220 does not have the...

I pickup this 10 30 up and need to find out about it. 502.256172 is the sears # Has a Tecumseh 10 Hp. 143-346062. I may need a flywheel assy. as the plastic fins are braking off from sun rot. Both rear tires are bad. I really need a manual for it. I found an old ad for a 1969 that is a...

What would this be called? Just 10 30? I picked this up today. It will be a better match for my lawn. I will need a manual....Parts and operation. It "ran" 3 years ago. Draining the oil and will clean it up after getting the wheels off. Has the KEY :thumbsup: It has a Tecumseh engine...

06/06/13 $50.00 502.256172 Tecumseh engine 10 HP. Sold for $150.00 09/05/2014

Is there a 12v electric fuel shut valve? How many times have you NOT shut off the manual valve after use? I would like to install something like that on my rider. Thanks LB

For sale for $10.00 plus $10.00 for shipping. Both have been cleaned up. Brake is in good shape. LB

What is known about this mower? Who made it? Year? It has a 11HP B&S 6speed Thanks.

who makes Yardman yard bug?

My engine is a B&S 11 Hp. The numbers are 252707 0668 01 83077571. Is the 83077571 a correct date code?

B&S 11 HP Throttle broke, changed........... I changed the control with one from Ebay. The old one had a GREEN slide (see pic 1) and the newer one has Black (see pic 2). The newer one will not go all the way up for the Black slide has extra plastic on it. This makes it so the choke doesn't...

Please help me find one of these. Mower # 917.255370 Thanks.

I have read that newer engines have coils that eliminate points. Can I do that to my 10HP? If so what would be the part #? Alternator magneto no. 610979. LB

What is the best way to remove/install the seat? It is very small (green) gasket/seat. What tool? I'm getting to much fuel to the engine (143.296042) It is seeping out the intake gasket. Could the Float be the problem? If so, what is the spec.? Thanks LB

I had to rewire my rider after the last owner butchered the wiring with a newer key switch. It turns over and starts with all the safety switches working. It only ran for a short time (gas). I"m not sure if the Off (M-G) position will kill the engine. I have the "G" terminal going to frame...

Today I started my Sear LT 10 36 with the Tecumseh engine ( after rebuild) and it seems to be running to "rich". Small amount of black smoke and gas seeping from the intake gasket. I set the idle screw out one 1/4 turns - Main mixture out one 1/2. Which way to lean it out? (Waiting for the...

I could use the name/address/phone number of any good used parts place. Someone that will remove a part and send it out. The more the better. I'm out west and I don't know of any here. Thanks

I need a sector gear for my lawn tractor and there is a range of models from 917.255270 -279 or 917.255370 - 379 I'm sure there are many others. I have part 677H954 677A244...

1977 Snapper parts Some engine parts from the 8HP B&S. Mostly deck parts. See somethings you need? Shipping from 89441. Very cheap parts. Actual shipping cost for UPS. Thanks LB

Very cold outside! I rebuilt this Tecumseh carb. on the kitchen table. All clean and ready to install on my Craftsman LT 10 38. I know that the East Coast is in for a winter blast. Good snowplowing everyone. LB

Sears Craftsman 10 36 917.255270

Feb.2013. complete needs just a little TLC

I have a good peerless and the Foote will be ok. Both 3 speeds The peerless is a better unit. I know it will fit in the LT 11 36, but will the brake work? LB

Clam shell is apart. It looks real good inside. Now I need the Spirolox R retaining ring. I think Sears has them.

I have a Sears 11 36 917.255370. The left axle came out when I tried to remove the wheel. I will now need to open the axle up and find gear and snap ring. (Is it plastic?) What I need to know is how to do it. Does the gear shift need to be removed first? Any vertical parts need to be...

What is the proper way to remove the rear wheels from the shaft. I got one off but the other is on tight. I have it soaking in Breakaway. LB

I need a replacement gear a.s.a.p. Thanks LB

I have a Sears YTV 16 tractor that had sat for 10 years before I bought it. I was told it was running then parked, but the deck was missing. It was used to drag a chain link fence around. I replaced the ignition switch, the battery, front tires, rebuilt the carb. and cleaned the fuel system...

917.255270 In the Sears direct catalog on the mower deck parts page, the call part # 6 a quill. Is that an error? I was looking up the spindle (2) assy. part. Is it a Quill? Thanks. LB

I have a Sears LT 10 36. I have the engine running well enough to try the mower deck. It has been setting for a long time and it shakes real good then the blades are engaged. The BELT has a"set" in it. It seems to be in OK shape. The question is...Will it smooth out in a short time after it...

I have a Sears LT 10 36..917.255270 w/Tecumseh 10 Hp. VM-100 engine. I'm in need of a throttle cable as the one on it is broken. The local repair shops were no help. Anyone know were to find a replacement? Thanks, LB

My neighbor wanted this gone from his yard. So it came mine. I would like to know is age. It must have been a good rer as it doesn't have any part that is not worn out! Even the motor was a broken rod. I also would like to know how to remove the deck as I'm going to take it to the scrap...

I have a owners manual for a Sears snow thrower. It is in rough shape, but all 15 pages are there. Very readable. If someone needs one I would part with it. The engine model is 143.60604 I also have a Sears LT/10 lawn tractor 502.25830 owners manual. Thanks for the help on my Tecumseh...

My LT 10 has a Lauson Power carb. that has no linkage to the throttle on top. It came with a small wire that was not installed after a (bad) carb. re-build. It is about 2 inches long and has bend at one end and a cork screw at the other. It may go to the governor. It starts and runs, but no...

I would like to have a picture/drawing of the throttle linkage assy. to this carb. I may want to purchase a new /rebuilt carb. Any help would be great. I have owned it for 2weeks now!