Search results

Thank you.This works.

Hey all.Hadn't been posting for a while,so here's my queery,acquired a good Husky last spring(March 2020). So now I'm thinking of getting a set of front wheels BEFORE these wear to far down.Husqvarna HU700F,Front self propelled,Honda G V 160 engine.Anybody got a good online place to send me?

Check the Husqvarrna HU 7OOF with the Honda GCV160 engine.Not a bad choice at all.Front Wheel Drive.

Stihl FS70R is my horse.Low end commercial.Highly recommended residential,plus it's a STIHL!!!

Wow!!!! Very well said,and I second that.

My Lawnboy 10330 (1999) Husqvarna HU700F (2016) Gettin' it in!!!!!!!

That's weird.I have tried to adjust my FS70r ala "Steves Small Engine Saloon".I can't tell a difference by ear,so i turn both screws in til seated and then 1 1/4 turn out each.Seems to run strong but no idle problems though.Maybe check him out on YouTube.Can't hurt.

The 1st Sat of June 2020 i was set to do major yard work by doing hedges 1st.Got my 40v hedger (LHT2436 bouht 5/22/19) and went to start it and it stalled.Hmm,that's not good.Battery was charged full,but no connection.Called B&D stated problem,and they promptly sent a new battery AND...

I know you guys can put me on the right trail.What would be the best way to acquire a bagger for my GCV160? Do you think Amazon or one of the "big box" stores?

Thanks for the info.Now what of that octane? 86 regular.But what about no ethanol? Wouldn't it be a difference between the 2,86 reg as opposed to 86 no ethanol?

Oookay now.It's right at a year with the hedger.It did well until last Saturday,6/7/20.Charged the battery to full,got outside started to cut and machine cuts off.I'm thinking the battery wasn't on good.So i took it off,checked the power meter (all charged),put the battery on flushed,and no...

I acquired this mower about 3 months ago (March 2020) after it had sat for about 2 years.Cleaned the carb,changed the oil,new filter,etc,Runs like a top.I at first didn't know about the shut off valve or what it was for until i saw som Youtube vids,now i know.I tried using mine,but the mower...

I feel you.Like I said,the more info the better.We're all here to help each other.Nothing personal here.

More info the better.More than one way to peel a grape.

Or go to Donyboy 73 "make your lawnmower start on the 1st pull again" on YouTube.Thank me later.Good luck.

Same situation w/out the actuator.Mined was twice used then was sat for 2 years.Carb cleaned,oil, and Seafosm overnight in sparkplug hole.Ever since,3 soft pulls to move the oil,then a good half pull.Starts everytime.Just a squirt once a week to eat that carbon.Husqvarna HU700F,gcv 160.

Llollooolloll

Interesting.Last thing, Got a whole new carb from amazon,and will be putting it on tmrw (Sunday).Thanks,you been a great help.Happy Sunday.

Hey Rivets.I need your expertise on this 4 cycle mower if you don't mind.The problem i have is the handle.Well...it won't stay up.I tried a washer and it didn't really help.I figured if i took the whole star off and went to Ace hardware i could get an exact fit washer and maybe that'll do it.But...

Well i thought no question was a bad question? I should have asked the difference between 4 cycle and 4 stroke? But i looked it all up on 'tube ala donyboy73 and Steve's small engine saloon.Plenty of ways to peel a grape.Thanks though.

Now,if t's a 4 cycle do i use a mix of some kind?

Back meaning the back chute for the mulching block.But besides that,This mower goes for close to $500.Why would people not clean it at least Jeez? I'm just gonna clean the bowl,jet screw,and hope it fires up.Another thing,the handle will not lock in place.I've tightened it as much as i could to...

I've seen your instructions on another post,and you are dead right!!! However i did all the same exact things to my B&S.My thing is whats with the back? I tried to open it and can't.I did however get this thing started after priming a bunch of times but wouldn't stay running.

Someone's bringing this mower over.Says it won't start.Anybody know about these?

My silver series 10330

I run my mowers for a minute to get the oil warm.Then i have small platic bowl and catch the first pouring out then place it onthe ground and leave to do other things.Later,i'll finish by turning the mower to get oil left.No muss,no fuss,no rush.Works fine everytime.

Have to report this:the Husqvarna has passed all tests.As good as my old Craftsman.Just as big,but more importantly,it's a little lighter which is a plus. Cleaned it so good(carb is now VERY clean),Seafoam in spark plug hole,sat for a half hour,oil change w/seafoam,fresh gas w/seafoam.I give...

Hi.I always notice people say how many hrs they've gotten on their machines,and in so-and-so time.So do these riders have like a timer or counter or clock on them?

Can someone explain these to me.I wanna know what year this mower was made.I see 2014 but is that for the law or this model?

Husqvarna HU700F GCV160 for the way bigger front yard.My Lawnboy siver series 10330 for the flatter back.

I'd send photos,but i keep getting "picture size it too large".I thought Lawnworld's site does the auto fit thing.

I can believe it.Called one farm and tractor store to ask if they put these back together.An authorized Husqvarner sales and repair mind you,i was told i had to buy a new carb in order for them to take it.Well,that was my motivation.I watched 1 of my faves,Donyboy73- "How to make your mower...

Has anyone taken 1 of these off lately? I did.l had no idea.The gasket sequence baffled me for a week.Along with the linkage assembly.You can tell i'm a novice.Well inside the carb is your fuel jet.It's a small screw that will give you a fit.Then a flute-looking thingy you clean also with a...

Alright,alright,alright!!!!!! I did it! I put the whole carb assembly back together guys.I was familiar with the Briggs because of my Craftsman FWD mower.Bit off more than i could chew,but i got it.Husqvarna HU 700F GCV 160 is now on deck.i can only hope it'll be HALF as good as my Craftsman was.

Almost sounds like my situation.I have a LB 10330,RWD.My cable/spring connection has loosened.So i wiggle the little silver piece on the drive bar out some,put a piece of tape on it,and so far it works.Don't know why it happened.

Check me out...carb wasn't bad,so i presume it's the gas lines sitting for 2+ years.After getting it put back i'll know.Going obvious.

I tried that,but it seems it just tightened it.I may need 2 needle nose pliers pulling the opposite way.Going to a dealer today.

Hi all.Coming over from the Craftsman,Lawnboy,Stihl,& Black&Decker forums. Brand new to Husqvarna ownership.So here goes.... My boss's mom-in-law had this lawnmower that was only used twice after buying it brand new. However it sat for 2 or more years in her shed so naturally it wouldn't...

To each,his own.I liked my same size wheels.

Well,truthfully,up until 5 years ago i didn't give a hoot about 'mowers.But once i was GIVEN the Craftsman i was hooked.My giver showed me WHY it didn't run.EXPLAINED how it happened.Then gave it to me after showing me how to fix and prevent.When i can't go any farther myself,it's either...

Could NOT find 1.Ace hardware fixes them,but all both places had a 2 week hold.Tried another lawn/garden place and they too had a 2 week hold.In the meantime my boss gave me a deal i couldn't refuse.

Loolllooll

Hey all.This has been a great feed for all.So to shorten this,i had already taken the cover off the s/p belt.With the lever engaged it was very harder to turn as i had changed the belt before.Starting the mower was no problem.Even tilted it and it ran fine until i pull the S/P lever.Then it...

Lmao,oh snap.

I did.Bought my boss's mom-in-laws Husqvarna for $100.Only used twice.We'll see in the morning.

My FWD self propel This Craftsman is a FWD 22" mower.#917.377131.Self oropel won't engage.I have been thinking it is the pulley for the belt.Since SearsParts is no more,pulley is unavailable.Wheel gears are good as the wheels are still new.It was suggested maybe it's the transmission.

I'd rather do that here.Where you actually have people that can lead me in the right direction.Either get repaired or purchase 1 brand spanking new.But work is steady so i may have to bite the bullet and get a new 1.Remember social distance and wash your hands.

Yellow pages?!!.....

Anybody good at fixing Craftsman lawnmowers in Greensboro,NC? I need mine repaired ASAP.Hit me up.