Search results

I covered that... dead is when you do not return to planet earth...

The mower just needs a little normal maintenance... no repairs. Stuff like changing the oil / filter, belt, blades, pulleys, are quick and easy.

I can tear it apart and put it back together, it's no problem at all homie! I'm putting the new blades on and sharpening the original ones That way, I'll have 2 sets of blades.... backups are good. My problem is I run my own business and work a lot of hours and it's a dolla waitin on a dime...

They must have closed down... that domain name is for sale now

Toro makes their own engines (made by the CCP)... so far, mine has performed very well. For $4k it better perform well!

But, you're still here... so obviously you did NOT actually die. Dying is when you don't come back. You were just unconscious and they told you your body was not functioning for a few seconds. One day you will actually die and never come back... and you will be Shocked!

Those look pretty good https://www.amazon.com/Zero-Turn-Mower-Deck-Blades/dp/B01FVF6I1S/ref=sr_1_4?crid=2AIXWD4EOFRJ3&keywords=Mower+blades+54%E2%80%9D+bad+boy&qid=1652903371&s=lawn-garden&sprefix=mower+blades+54+bad+boy%2Clawngarden%2C218&sr=1-4 Reckon they balance these blades??? Maybe they...

I never cut when the grass is wet. The design of the ones I link to on Amazon looks identical to the ones on the Rotary website.

These appear to be the same design as the ones you posted...

Yep, I', finding that as well at least for belts and blades

I blow mine right out the side, no restrictions and yes I'd like for the grass to be mulched a little bit (cut more than once) before being shot out the side. I wonder if the 18-3/4" X 5/8" TORO BLADE ( Toro 115-9650-03 ) you are speaking on would work on mine (Toro TimeCutter MX 5475 with 54...

We can prepare for what happens to us after death... which is something every one should be doing anyway since we're all going to die eventually whether there is nuclear war or not.

That's all the funny pitures I got right now

So, what brand and / or type of blade cuts best? You know, best bang for the buck! For my immediate need, I'm going to get the 3PK Oregon Gator G3 Blades from brutha bezos website cause they have good reviews...

Quote - ""But,for most people, they realize that genocide is unacceptable"" Yeah, so this time around lets let the rest of the world go fight the nutjob... the US has been covering the world's backside for a long, long time... we need to start taking care of our own country before it is lost

Can you imagine parents with the last name Pootin naming their kid Glad I'm Here? When he introduces himself to people, it sounds like he's saying "I'm glad I'm here pootin" No wonder this guy is an angry man!

Yep... as they say, it's the land of fruits nuts and flakes

https://www.jackssmallengines.com https://www.partstree.com https://www.propartsdirect.net Any other web addresses to check out?

I have no problem buying Toro parts... just wanted to know if there are some online retailers folks on the board here could recommend as being reliable, and good vendors to work with

OK, thanks. I had search and saw numerous options. I was just curious if anyone hear could make recommendations based on knowledge that a particular vendor is good to work with. Thought I'd ask since some of the guys on here work with this equipment as a business and prob ably have to buy...

I've already downloaded the Toro manual along with the complete parts list. I'm interested in finding out where I can buy parts from vendors other than Toro. I'm thinking in terms of how things are with automotive parts...there's many options online for purchasing parts. Just curious if there...

Conversation overheard in Folsom Prison out in California.... "Hey man, what are you in for?" "Dude, I got busted smuggling in 16 pounds of heroin and I got 6 months in this joint... what about you?" "Well, I got caught smuggling in parts for gas powered lawn mowers and was sentenced to 14...

I purchased my Toro TimeCutter MX 5475 in June of 2020 for mowing my large yard (little over an acre), and the blades are already not cutting as good as they were, so I guess they need to be replaced. Figured I'd go ahead and get some belts to have on hand, maybe some belt tensioners as well...

So, I need to somehow put the PINs of the multimeter into the connector of the switch under the seat while the plugin is still inserted in the switch? Sounds kinda hard to do ans then sit on the seat to test, but I can see how that would show when the circuit is open or closed.

Reading comments after a video found at Here's something I need to consider that one guy told of concerning his experience...

Well, I went out to tinker with the mower And, I turned the key on without starting the engine (engine always starts as long as levers are out) With the key on. I moved the levers in and I can hear the module moving or doing something. Then, I moved the levers out and I hear the module moving...

Or... I could by pass the module like this guy did...

I'm looking forward to giving it a proper burial How much do you think these thongs cost? I found a Toro dealer, but they are about 35 miles away and I'm going to have to rent a trailer to get the mower over there. And, they said they have about a 4 to 6 week backlog right now. Unless this...

Yes, the brake control module seems to be functioning properly I'll look thru the ,manual to find the test section and see what that says

I put a jumper wire in the switch connector under the seat that did not help. And, all the wiring seems to be connected well with nothing appearing to be out of place The video posted is for 2011 teat model and I bought mine in June of 2020, so I'm wondering if their setup has changed

The engine cranks just fine. The issue is when I bring the levers in to start using the mower, that's when the engine die. I'll start by putting a jumper wire in the switch under the seat and see what happens And, I'll check the ground wire along with other wiring to see if anything is out of...

Thanks for the video! I downloaded that and put it in my mower info folder.

Thanks guys!, I'll try that to see if the switch is bad or not I'm not sure, so I'll need to go out and see If nothing is coming on, does this also point to a bad seat switch plug?

Is there a good source to buy these online some where?

I'm in the seat when bringing the levers in and the engine starts to cut off. And, I didn't know the mower had brakes - so I'm not applying the brakes that I know of. I'm not doing anything different than I have been since I bought the mower. I guess I need to call Toro to see if they can...

I have a Toro TimeCutter MX 5475 that is having an intermittent issue that I'm hoping is just a sensor that can be by passed I can start the mower just fine, but the last couple of times I have used the mower... once I start it up, it dies when I bring the levers in to back out of my shed. It...

With today's "high technology", do they have grass seed that has a coating around it so you can just throw it out on top of the ground and water it and the coating fuses each seed to the ground after being watered so it can sprout and start taking root? I'm hoping that have grass seed now that...

I found the Micro Rain MR25 and it runs around $2,890.00 https://www.atsirrigation.com/products/hose-reel-traveling-irrigators/micro-rain It needs 45 psi as the minimum inlet water pressure. I've got to get a tester from the hardware store to see what PSI my water supply provides

Meh, local law enforcement will want to have a word once my neighbors turn me in I like the Kifco B-Series E110 I saw this online at: https://www.kifco.com/OurProducts/Water-Reels/B-SeriesWater-Reels/ModelE110/tabid/108/language/en-US/Default.aspx

I like the ReelGreen Model RG20 But, I cannot find anyplace to buy it. Is is discontinued?

I have a big yard and I rent so I can't just put in a sprinkler system. Any ideas of equipment that can be used to crawl across the yard unattended and water large sections? I was hoping to connect the water hose to some piece of equipment and have it go across the yard and water on it's own...

Yes, I'm aware that the oil should be changed each season and the oil level should be checked before you mow each time. That's a given... Synthetics don't cause leaks on new engines. A lot of equipment, especially in the auto industry come from the factory with Synthetics. On old stuff, yes it...

Actually, I forgot to post that the Toro engine already has it's own drain hose built in I saw it and didn't realize it was an oil drain hose until after watching a few reviews on this mower on Utubes Well, I'm treating mine as though it's high performance machinery so I'll be running...

Not sure if that would work but you could always see if a cross reference chart shows the 2 part numbers are interchangeable. I recently did my first oil change on mine and I know for sure that Wix 10239 works on the Toro engine. I even got one of those oil filter magnets to put on the end of...

Well, after scoping out some Utube vids, there is a hose already on this mower fo draining d oil so it's all good up in the hood. So far, this is a really comfortable mower with plenty of power and it cuts good too. I've used it three times for a total of about 5 hours so I'm draining the oil...

Yeah, I may get that hose I posted the link to anyway and if the threads don't match I'll go to the hardware store and get some adapters I also have a suction pump setup that would work too. I'm just looking for an easier way than what they show in the user manual since draining the oil should...

Doing a little searching and the Wix website shows that the Wix part number is WL10239 And, Orielly's Auto Parts can order them in which is what I did so I would not have to pay for shipping ?

Recently got a new Toro TimeCutter MX 5475 which seems to be working great after having used it just 3 times to mow my large yard Instructions say to change the oil after first 5 hours of use so just curious is any body know the Wix oil filer part number for Toro 136-7848 Also, does anybody...

My status has been updated!

Can't beat that for $250 :)