Search results

How Would The Fuel Line / Vacuum Lines Hook Up On This Commercial Machine Any Help Will Be Greatly Appreciated

On This John Deere Ryder The Engage Blade Function Is Not Engaged & The Disengage Function Is Engaged. Am I Missing Something ? Just Doesn't Seem Right. What Can I Do To Correct It ?

This is a mower that is not that old. The problem is that when running oil starts to come out of the breather tube and out the air filter box. I have installed a new Honda carburetor & changed the oil. I went as far as replacing the spark plug / install new carburetor gaskets / took off cap /...

This Engine Leaks Oil Out Of The Carburetor When Running. Engine Has Good Compression. Engine Is Not Over Full Of Oil - Oil Level On Dip Stick Registers Full Of Oil ( Not Over Full ) Any Suggestion ?

When Running Engine Leaks Oil Out Of The Carburetor. I Pulled The Flywheel & Cleaned A Port Of Where The Oil Drains. Still Leaks Oil. Engine Has Good Compression. Any Suggestions ?

How Does One Change Out The CamShaft Seal ? Thanks For Letting Me Post This.

HELP : M-305447 T-0568-f1 I installed a new carburetor & adjusted the valve clearance on both intake & exhaust ( turn the flywheel to the end of the compression stroke & gapped both valves to 4-5 THEN turned the flywheel again to top dead center to adjust the other side as...

I Own A Briggs Twin ( 461707-0143-e1 ) That I Am Trying To Rebuild. Both Connecting Rods Are Busted Up. I Plan To Install New Pistons & Both Rods. My Delima Is I Am Not Sure How ( Which Side ) The Rod Hooks Up To The Pistons. I Am Sure The Is A Special Way That I Don't Know. Can Someone PLEASE...

I Am Having Trouble Finding Some Homelite EZ ChainSaw Parts. Type Number : 10109 Serial Number : 02640622 Oldie But Goodie. This Is A Hand Me Down Saw & I Am Trying To Pick Up Where My Dad Left Off. I Cannot Find Any Information On This Saw. Any Information Greatly Appreciated. Thanks...

I have this chainsaw that I need the Lock Throttle ( part number : 530036098 ) Item is discontinued and I would even accept a used one Can someone assist me with this ? Thank You.

I have a Briggs Horizontal Shaft 5.0 engine / Tiller ( model : 130202 ). Engine keeps sheering the flywheel key. Clutch secured tightly. Keeps sheering flywheel key when started and suddenly stops afterwards. Flywheel replaced with another used one and still have the same issues. Any Ideas /...

Looking for a Craftsman P2 trimmer for parts. Any suggestions ? melvincribb@hotmail.com

Any idea where I can purchase one ? Some carbs have the off-set center notch on the adjustment needle. Seems no other way to turn the in or out without this tool Thanks for any input.

I need the engine harness. Dog messed up mine and I have the wiring harness. But not the engine harness. Used will be ok. Any suggestions ?

I have an oldie but goodie Zero turn with a Kohler Command 27 engine. Now this thing only starts but dies quickly. Seems like it running out of fuel. I cleaned the carby and I even checked the fuel solenoid that seems to be working properly. Fuel is coming out of the fuel line hose that...

The reason I ask is that there is no hose connected. Just a small piece of brittle line that broke off. Maybe someone could give me an answer as in reference to what to put in it's place. Thanks. This is an Older style Stihl chainsaw that I have a dilemma: On the body of the saw right next...

I was given this old tractor by my grandfather and I have a dilemma: It has a 12.5 Kawasaki electric start engine. Very sound running engine and worth keeping but when it is running and I engage the shifter for forward or reverse the engine will die. There is no safety switch under the seat...

I was given this old tractor by my grandfather and I have a dilemma: It has a 12.5 Kawasaki electric start engine. Very sound running engine and worth keeping but when it is running and I engage the shifter for forward or reverse the engine will die. There is no safety switch under the seat...

Last year I replaced my Rotary Carby on my Echo 225 trimmer and it worked fine until now. I have been using 40:1 mix and 91 octane on the fuel. My unit sputters when I try to reeve it up. I tried running it with the muffler off and it ran the same ( sputtering ). I replaced the fuel lines, I...

I am in need of a Fuel Tank for this blower. Part number 695000322 Any suggestions as in Reference to a New One OR a Good Used One ? I already have tried Ebay and Amazon to no Prevail. Please Respond. Thanks.

I have a Echo 4500 chainsaw that has no spark. I disconnected the kill wire and still no fire. It has a C.D.I. module and it also has a coil. Do I have to replace them both ? Is there a way to test which one is the bad one ? Would anyboyd have a good used saw for parts that they can sell me...

On this saw I have no spark. It has a coil and it aslo has a C.D.I. module. I disconnected the kill wire and no spark. Do I have to replace them both ? Where will I be able to find these parts ? Does anyone have a junk echo 4500 chain saw that want to get rid of ? Please respond...

On my MS-290 saw it is no longer oiling ? I see nothing that has come loose. Can it be a worm gear or something else major ? Please Respond. Thanks.

On this blower, can someone tell me how the fuel lines hook up on the carburetor ( which lines go where ) and on the primer bulb ? I kinda took off to replace and I am confused now. Any help / input will greatly be appreciated. SKU 952-711-925 24761-01679 :confused2:

On a Honda GX 240 OHV 8.0 hp, what would be the valve clearance on both intake and exhaust ? QA 2x Can someone help me with this ? Please. Thanks.

Where can I get a set of Stnd Tecumseh Rings, Part number 36315 ? Please respond. Thanks.

I have re-lapped the valves, I have replaced the spark plug & fuel filter, I have replaced the needle and bowl gasket & I have flushed out the gas tank and used Hi Octane fuel. My problem is that when I turn off the ignition key, there is a Pop / Backfire thru the muffler. I have connected the...

On this engine it was accidentialy ran without oil for a few seconds / a minute or so and it locked the engine. I can turn the flywheel barely very little both ways. My question is that is this engine shot ? Or can it be unfroze and back to normal running condition except this time with oil...

ON this Briggs OHV, It has a Nikki Carburetor. I have cleaned it throughly several times and when running it Sputters and Coughs. It is the carby for sure. I have gapped the valves and I have replaced the timing key. Everything checks out but when I reeve up the engine it sputters alot. Any...

How does one trouble shoot a kill switch / switches on a Ryder. There is one up under the seat, there is one on the clutch drive and there is one on the PTO. I piged tailed the one on the seat but it still kills engine when clutch is released. PTO is the only thing that is electric. Blades...

How does one trouble shoot a kill switch / switches on a Ryder. There is one up under the seat, there is one on the clutch drive and there is one on the PTO. I piged tailed the one on the seat but it still kills engine when levers ( hydrostatic drive ) is engaged. PTO is the only thing that...

I am needing an Ignition Module for a HomeLite 330 ChainSaw ( UT 10604A ). Part number is: A01546 ANy place I can get aftermaket parts or used parts for HomeLite ? Please Respond. Thanks.

I have a Poulan Ryder ( single ) OHV 18hp Briggs that will not fire. I cleaned the coil and flywheel along with setting the air gap to specs. I have disconnected the kill wire to the coil and still no fire. This unit is about 10yrs old. New battery and new plug. Just not firing. Fuse is...