Search results

Results 1 to 20 of 69
  1. G

    Self propellled unit not working

    I'm working on neighbors Lawn Boy model 10605 because self propelled system quit working. Belt tension is good and and gear box will grab and turn wheels a couple of times and quit. I'm fairly confident gear box/axle need replaced, however, I found something about a recall (attached) on the...
  2. G

    Chipper/Shredder rpm's

    will do.. thanks for reply
  3. G

    Chipper/Shredder rpm's

    I have a Craftsman chipper/shredder with a Briggs 8hp that seems to be running way too fast. Is there a way to adjust the rpm's?
  4. G

    Gas tank replacement

    I'm working on this tiller for a neighbor (true story). The machine is really in good shape except for the tank. I can't believe part has gone missing. There's one on bBay that's in the bidding process. I'll check with owner and see if he would rather go new if you still have that one in...
  5. G

    Gas tank replacement

    Thanks for reply slomo. I have a call in to a local shop where I've bought used parts before.
  6. G

    Gas tank replacement

    Full of rust. I think that can be resolved, however, the secondary sump chamber is paper thin and rusted through.
  7. G

    Gas tank replacement

    Thanks Scrubcadet10.
  8. G


    It ain't the space shuttle "Classic"
  9. G

    Gas tank replacement

    Help me "Oh Wise Ones". I'm trying to replace gas tank on a Craftsman tiller model 917.295553. Engine is 5hp B&S model 13502-0237-01. Showing tank part number 495391 or 694315 is discontinued. Is there another alternative?
  10. G

    Coil mounting issue

    Ok, thanks to all.. I'll contact seller about a return/replacement....
  11. G

    Coil mounting issue

    Thanks for reply Star Tech. Everything I'm looking at says part number 590454 for that model number. Am I doing something wrong?
  12. G

    Coil mounting issue

    I recently ordered and received a replacement coil but the mounting holes won't match up to engine. Is it advisable to drill mounting holes on coil to accommodate? B/S model: 12H802-2682-B1 Part received: Ignition Coil fits Briggs Stratton 491760 492416 493237 590454 692605 695711
  13. G

    Slow to get to speed

    Thanks guys... That helps a bunch
  14. G

    Slow to get to speed

    I have a self propelled mower (model 12AE46JA009) with a 173CC OHV engine that will start ok but it takes about 30 seconds to rev to full operating rpms. After it's warm, it will start and operate normally. Any ideas what might be causing this?
  15. G

    Part number request

    Hello, Can anyone tell me the part number I need to replace the cable that operates the transmission for this mower. I'm having trouble making determination from the J.D. website. Thanks
  16. G

    string size

    Dumb question..... What size replacement string is used on a FS120 trimmer?
  17. G

    chainsaw part substitute

    I'm working on a chainsaw UT 10883, and am in need of the following part. Homelite 04933A Washer, Cupped It shows as obsolete and wondering if anyone might know a substitute?
  18. G

    Dixie Chopper propane hose

    I sprung a leak today and am wondering if the hose is high or low pressure. It's about 16 inches long with female fittings on both ends. Is this a dealer part or will something else work?
  19. G

    1982 Yamaha G1 head scratcher

    Can anyone give me some guidance as to why recently purchased golf cart will only run without any of the air cleaner parts hooked to carb? It runs great with nothing attached to that side of carb, but any type of obstruction, even just the hose, will cause it to load up and flood to a stop...
  20. G

    backfirin Briggs

    I have a BS Intek 344cc 12.5hp (219907 0131 B1) that was allowing gas past the carb to the sump. I attempted to get the needle to seat with no luck so I purchased an aftermarket carb. After installation, engine surged and backfired, which it didn't do with original carb. I removed float...