txmowman's latest activity

When the engine is surging, slowly apply the choke. If the engine begins to smooth out then I would start with cleaning the card. There...

651-691- 730 are all the same block. as long as you have room for the air filter it will work and as long as the crank shaft is the...

Use a tachometer to see what rpm the engine is running at high idle. Toro’s spec is 3800 rpm. What do the rpm’s jump to when it...

Champion RN14YC

The NGK and Champion plugs listed are not the same. Physically, yes. Performance, no. Research it. It is always best to stick with what...

Agree with @Auto Doc's, replace them if you are in question.

No, these plugs look typical for the most part. Overheated, if anything, not rich. Rich running would be dark black soot (unburned...

This would be the case for all engine models except FR, FS, and FX. Kits are available for these models only.

Kawasaki does offer kits for current engine models FX, FS and FR models. The part number you would need for FS is 11028-6316.

I read that the video was not your mower. I apologize for assuming that you were having a similar issue.

I should have been more clear in my earlier post. The video of the creeping idle is not my machine. I only found that video to confirm...

The governor bolt was stripped because it has left-handed thread. The person who tried to loosen it turned it the wrong way. Very common...