Recent content by ice

Hello to all. My nephew was given a free go-cart. and old uncle here is given the chore of getting it running, So the Briggs and Stratton will not start. I looked into it and found that it had no spark. I disconnected the black kill switch wire and now have spark. I would like to order a new...

Hi Ilengine So sorry for the late response( elderly father). Is this the number? Hope you can read it / If not I will try cleaning off with paint remover k :) thank u for your help on this

turns out it is the carb. the seat and needle. I think I will get a new carb\ does someone here know the part number for this carb? Thank you

the only problem now is when the mower is turned off, it will not restart without a squirt of starter fluid. ps. these are the pics of the carburetor before cleaning.

she is up and running like a champ now. there are some issues tho. 1. there is no primer bulb at all. 2. how to put the oil back in the trans? If I screw the bottom plastic housing back in .there is no fill hole on top. ps. the carburetor was stuck with varnish

Hi prim how would you go about taking off the bushing? do you have any pics?

Hi all I honed out the plastic wheel and now it spins freely. I also check the little transmission to see if anything was hung-up in there. What kind of transmission fluid does it take? I pulled out the spark plug and it was brand new. I spray a little starter fluid in the cylinder and fired...

Hi ILENGINE This is what I got so far, I got the wheel off. The wheel looks good. The shaft that the wheel goes on does not spin in any direction and has grooves in it. The groves lock it in place. My question is, does the spindle spin/supposed to spin? Or does the wheel spin with the metal...

I pick this up for $20.00 bucks the front left wheel is locked up, also I can't get it off. also, the gas tank needs to be replaced. is there a used one out there somewhere? thank to all chim in

hi- hey ilengine while i have your ear- what is this hole in the rear axle for? it looks like it has threads

Hello, took me a while to back The dang them is just to tight to get around the last pully/ Any tips? I am getting very frustrated and the lawn is getting tall

The belt that drives the transmission broke well shredded. My questions are. 1. What is the best way to take off the remanence of the belt? the tractor is really heavy. 2. What size belt or belt number should I get to replace it? where to order it from online. Thank you

So all is working on the lawn mower But--- There is always a but lol. the whole problem that started with this mower. This darn green ground wire- I just want to replace the part. So the question is what is the name of this part? what is the part number if anyone has it. and how in the word do...