Auto Doc's's latest activity

  • A
    Auto Doc's replied to the thread Grass Diverter Insanity.
    Why not just use the mulching plug? It does show that option.
  • A
    Auto Doc's replied to the thread MTD deck height.
    Does the deck side adjuster area have pull out release pins that can be set is an upper or lower set of holes? Some decks had this odd...
  • A
    Auto Doc's replied to the thread Gas tank removal.
    This shows to be an older model. Can you provide a couple of pictures? That may help us help you. As near as I can tell, this is a...
  • A
    Auto Doc's replied to the thread Voltage regulator.
    Hi Ryans' Don't beat around the bush instead and create confusion. Come out and say it is the interconnect harness segment you need...
  • A
    Auto Doc's replied to the thread Mountfield hunting/stalling.
    Hi Paul, Sounds like you are describing the governor on the engine reacting to a carburetor issue. The carburetor likely needs to be...
  • A
    Auto Doc's replied to the thread Fuel filter suggestion?.
    https://www.ebay.com/itm/135089505864?chn=ps&norover=1&mkevt=1&mkrid=711-167538-502585-0&mkcid=2&mkscid=101&itemid=135089505864&targetid=...
  • A
    Auto Doc's replied to the thread Voltage regulator.
    Hi StarTech, Over the years, I think many manufacturers have come up with these "creative" niche jumper harnesses just to trip people...
  • A
    Get it straightened and welded before it gets worse. It is basically helps hold the clippings under the deck longer so it mulches them...
  • A
    Auto Doc's posted the thread EFI, A reference guide. in Brands.
    I'm sure there are some independent operators out there that are starting to see some of these newer EFI engines trickle in has...
  • A
    Auto Doc's replied to the thread Voltage regulator.
    Looks like a typical low Amp output regulator used on many older models without the electric PTO clutch option. A high Amp output...
  • A
    I'm still one of the few in my area that will replace a simple broken plastic Bendix gear on a starter for a customer. Of course there...
  • A
    Thanks for the info.
Top